User manual

35
②
IMAGE SIZE:
NTSC: 720x480/ 720x240/ 360x240
PAL: 720x576/ 720x288/ 360x288
③
Set the RECORD FRAME for each camera:
- NORMAL: Normal record frame.
- EVENT: Event record frame.
④
QUALITY: Set the record quality of normal recording and event recording. There are three record
qualities: Fine(F)/ Normal(N)/ Low(L).
⑤
PRE/POST: Set the time period of PRE RECORD TIME and POST RECORD TIME.
PRE RECORD TIME is 0~5 sec, the default is 5 sec. POST RECORD TIME is 0~60 sec, the default is 10
sec.
NOTE: The PRE RECORD TIME and POST RECORD TIME are not suitable in NORMAL RECORD mode.
⑥
EVENT TYPE: A: Alarm/ L: Video Loss/ M: Motion Detection / -: N/A.
6.4 Event Setup
Event Record: DVR provides many kinds of Event setups; VIDEO LOSS, MOTION DETECTION and ALARM;
if the event occurs, the event record will be started.
6.4.1 Motion Detection
Through the MOTION DETECTION menu setup, DVR can detect whether the motion occurs or not to start
recording or do related actions.
CHANNEL
Set the camera channel of MOTION DETECTION.
SENSITIVITY
The higher the number is, the more sensitive. The default is 3.
AREA SETUP
Move the cursor to the desired area and press ENTER button to save it. Press Z(+) button to select whole
area, press Z(-) button to deselect whole area.
Mouse operation: Right button click (without releasing the button) and drag the mouse to select the area.
AREA SETUP grid: 22 x 15
TEST MOTION
Test the MOTION DETECTION to see if it matches your demand.