User manual

27
TIME ADJUST
①
If the INTERNET TIME ADJUST is “ON”, system time will be adjusted to the time offered by the internet
server.
②
If the INTERNET TIME ADJUST is “ON”, please set the IP address of SELECT TIME SERVER.
③
Set the correct TIME ZONE standardizing GMT (Greenwich Mean Time).
④
If the DAYLIGHT SAVING TIME is “ON”, please set the starting date and time and end date.
5.3.3 Video Standard
Select from “AUTO”, “NTSC” or “PAL”. The default is “NTSC”. If you select “AUTO”, this DVR can detect
NTSC/PAL automatically.
5.3.4 Language
Select the system language. Available languages: ENGLISH, POLISH, SPANISH, RUSSIAN, CHINESE (T)
(Traditional Chinese), FRENCH, TURKISH, GERMAN, ITALIAN, PORTUGUESE.
5.3.5 Remote Control ID
If you are operating more than one DVR in the same place and wish to use the remote controller, the remote
controller ID setup is required. Otherwise, do not change the default set value and “ALL” should be selected.
Creates the Remote controller ID:
Select one of the numbers 11~14, 21~24, 31~34, 41~44, and then press the same number button on the
supplied remote controller before the operation.
5.3.6 Key Echo
- ON: The beep sounds when you press any buttons on the front panel.
- OFF: The beep does not sound.