User manual

25
SPOT SEQUENCE TIME
The duration of spot sequence can be set from 1SEC to 60SEC. The default is 3SEC.
VIDEO LOSS SKIP
If you select “ON”, loss images will be skipped. The default is ON.
5.2.5.1 SPOT Mode Operation
Manual Mode
①
Press the “SPOT” button on the front panel to toggle “SPOT” mode indicated on the main monitor.
②
Press a camera button to display that camera on the spot monitor.
5.2.7 Camera
Change the values shown on the screen to adjust the BRIGHTNESS, CONTRAST, HUE and SATURATION of each
channel.
5.3 System
The value is from 0% to 100% and the default is “50%”.