User manual

5.1.7 Menu Operation

①

Press the MENU button to enter the main menu screen.

②

Move the cursor to desired position using the ，，， buttons, then press the

button to enter

each submenu.

③

Change the value using the F(-)，F(+) buttons or truning the wheel scroll of mouse.

④

Select the

item to exit the menu setup, you will see the following screen:

Select save or not, then you can exit the menu setup.

5.2 Screen

5.2.1 Auto Sequence

To set the length of time for switching each channel in the AUTO SEQUENCE mode. The value is from 1SEC

to 60SEC and the default is “3SEC”.

If there is no input for 1 minute during the menu screen display, the menu screen will be closed

automatically without saving of changed value.