Software User Manual

NetFLOW IP Network-Digital Video Recorder
6. Remote Live Viewer
page-95
6.1.2 Setup Panel—Group
You may put different cameras into the same group
Step 1: Go to the Group tab of the LiveView Setting panel.
Step 2: Log in to all the servers that contain the camera(s) you would
like to put into the group(s).
Step 3: Click “Insert” to create a new group; name the group for
future reference.
Step 4: From the window at the right, highlight the camera(s) that you
would like to add to a group and then click on the “<--“button.
Repeat the process until you are satisfied with the group setting.
Step 5: Click on the Delete and Rename button to remove or rename
a specific group.
Step 6: Repeat Step 3 to 5 until you are done with creating and
setting groups.
Step 7: Click OK.
Step 1
Step 2
Step 3
Step 4
Step 5