Software User Manual

NetFLOW IP Network-Digital Video Recorder
5. Setup
page-66
5.4 Setting - PTZ Config
Basic Setting
Advanced Setting
Miscellaneous
Install PTZ cameras following the instruction of the camera manufacturers.
A PTZ camera is usually connected to the PC with RS-485/RS-422.
Check the box on the camera list to activate the PTZ control function of a
PTZ camera.
Basic Setting: Select the camera model, com port, baud rate, and
address according to your PTZ camera.
Advanced Setting: You may setup the pan speed, tilt speed, zoom speed
and auto pan speed. Adjust the settings by dragging the bars.
Miscellaneous:
Tour Group: You can setup the Tour Group, please see page 16 for the
detail.
User-Define Preset: User-Define Preset for analog speed dome can
trigger the extra-function of speed dome itself such as auto-tracking, login
menu of camera…etc.