Software User Manual

NetFLOW IP Network-Digital Video Recorder
4. Event
page-57
PTZ Preset Go: The PTZ (pan/tilt/zoom) camera will go to a preset spot
when an unusual event is detected. Select the PTZ camera on the pop-up
panel, and then, at Alarm On section, select the Preset number with
which you want the PTZ camera to go when an event is detected; and
assign a Preset configuration for Alarm Off.
Note: You need to configure
your PTZ camera before using this
function. See Config at page 66
for PTZ camera configuration.
Alarm relay output: Triggers
traditional alarming devices that
connect to the system, such as
alarm lights and sirens.