Software User Manual

NetFLOW IP Network-Digital Video Recorder
4. Event
page-53
4.1.8 Event - Digital sensor input Event
Step 1: Click and highlight Digital Input on the event type list, and click the
Insert Event icon.
Step 2: Select the device that is connected to your system, that is, the
DVR you are working with.
Enable Event: Check the box to enable the
event notification.
Automatically cancel event when event
disappears:
the alarm/action will be off once
the abnormality is fixed or ends.
Manually cancel event or event continues
triggered: The alarm/action will continue until
being canceled from the DVR Main
(Start>Open Event Report>Cancel All Events).
The user currently not at the seat watching
the screen will be notified by the alarm.
Activated Period: You can set up the system to react during a certain time
period; for example, office hours