Software User Manual

NetFLOW IP Network-Digital Video Recorder
4. Event
page-51
4.1.7 Event - Camera Masking
This function alarms you when any of the cameras is blocked.
Enable Event: Check the box to activate.
Automatically cancel event when event disappears: the alarm/action
will be off once the abnormality is fixed or ends.
Manually cancel event or event continues triggered: The alarm/action
will continue until being canceled from the DVR Main (Start>Open
Event Report>Cancel All Events). The user currently not at the seat
watching the screen will be notified by the alarm.
Activated Period: You can set up the system to react during a certain
time period; for example, office hours