Software User Manual

NetFLOW IP Network-Digital Video Recorder
4. Event
page-46
Event - Foreign Object (Added new object to the camera view)
Note: For instance, if you want to prevent somebody from leaving a
briefcase in a hallway, you may put a briefcase in the hallway where the
camera is aiming. On the screen of the camera, draw an area that fits the
size of the briefcase and define it as the object size, and then remove the
briefcase before activating the Smart Guard function on the Main
Console. The system will consider everything in the screen normal when
you click Start to activate the monitor function.
Start Simulation: Click the Start Simulation button and test the function on
the preview screen.
4.1.5 Event - Missing Object
Alarm will be set off when an object disappears in the defined area
on the screen.
Enable Event: Check the box to enable the event notification.
Automatically cancel event when event disappears: the alarm/action
will be off once the abnormality is fixed or ends.
Manually cancel event or event continues triggered: The alarm/action
will continue until being canceled from the DVR Main (Start>Open
Event Report>Cancel All Events). The user currently not at the seat
watching the screen will be notified by the alarm.