Software User Manual

NetFLOW IP Network-Digital Video Recorder
4. Event
page-42
4.1.2 Event - Signal Lost
Enable Event: Check the box to
enable the event notification.
Automatically cancel event when event
disappears: the alarm/action will be off
once the abnormality is fixed or ends.
Manually cancel event or event
continues triggered:
The alarm/action will
continue until being canceled from the
DVR Main (Start>Open Event
Report>Cancel All Events). The user
currently not at the seat watching the
screen will be notified by the alarm.
Activated Period: You can set up the system to react during a certain
time period; for example, office hours
4.1.3 Event - General Motion Detection
Detect any movement in the defined
detection zone.
Enable Event: Check the box to enable the
event notification.
Automatically cancel event when event
disappears: the alarm/action will be off
once the abnormality is fixed or ends.
Manually cancel event or event continues
triggered:
The alarm/action will continue
until being canceled from the DVR Main
(Start>Open Event Report>Cancel All Events). The user currently not at
the seat watching the screen will be notified by the alarm.
Activated Period: You can set up the system to react during a certain
time period; for example, office hours.