Software User Manual

NetFLOW IP Network-Digital Video Recorder
3. Schedule
page-39
3.7.1 Always Record: Select this option to record the video at all time.
3.7.2 Record on Event: Select this option to obtain the Select Event panel.
From the Smart Guard list, check the box of the camera(s) that you want
to trigger the recording action. Click OK to complete the setting.
3.7.3 Record on Motion: Select this option to start recording when there
are motions detected. To detect Motion, you have to define a detection
zone. Left-click and drag the mouse to draw a detection zone. You may
define more than one zone on the screen by repeating the same process.
User can also click on “All” button to select the entire detection zone. You
may adjust the sensitivity and the frame interval.
3.7.4 Pre-record/ Post-record Time: The pre-record/ post-record function
saves the recording data accordingly. For instance, to set up a 5 second
pre-record time means the system will start saving the recording data 5
seconds before the event happens from the buffer.