Hybrid Standalone DVR User’s Manual V1.1.
Table of Contents 1 FEATURES AND SPECIFICATIONS .......................................................1 1.1 Overview ...................................................................................................................................1 1.2 Features....................................................................................................................................1 1.3 Specifications .........................................................................................
.1 Check Unpacked DVR..........................................................................................................27 3.2 About Front Panel and Real Panel .....................................................................................27 3.3 HDD Installation.....................................................................................................................27 3.4 Rack Installation .......................................................................................
.2 Manual Record.......................................................................................................................43 4.2.1 Live Viewing ......................................................................................................................43 4.2.2 Manual record ...................................................................................................................44 4.3 Search & Playback ..................................................................
4.9.7 Auto Scan Setup ...................................................................................................................67 4.9.8 Activate Auto Scan................................................................................................................67 4.10 5 Flip ...........................................................................................................................................67 UNDERSTANDING OF MENU OPERATIONS AND CONTROLS .........68 5.1 Menu Tree ..
5.6 Information..............................................................................................................................99 5.6.1 HDD Information .............................................................................................................100 5.6.2 BPS...................................................................................................................................101 5.6.3 Log ........................................................................
.3.1 System Information.........................................................................................................119 7.3.2 System Configuration.....................................................................................................121 7.3.3 Advanced .........................................................................................................................143 7.3.4 Additional Function ...........................................................................
Appendix B-6 Compatible SATA HDD List.................................................................................170 APPENDIX C COMPATIBLE CD/DVD BURNER LIST.............................173 APPENDIX D COMPATIBLE DISPLAYER LIST .......................................174 APPENDIX E COMPATIBLE SWITCHER ...................................................175 APPENDIX F COMPATIBLE WIRELESS MOUSE LIST...........................176 APPENDIX G EARTHING ...................................................
Welcome Thank you for purchasing our DVR! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series hybrid standalone DVR features and functions, as well as a detailed menu tree.
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2．Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation. 3．Installation Keep upwards. Handle with care.
1 FEATURES AND SPECIFICATIONS 1.1 Overview The hybrid standalone series DVR is an excellent digital monitor product designed for security field. It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame play function is suitable for detailed analysis.
Client-end user can download the file to local HDD to backup via network. z Record & playback function Support each channel real-time record independently, and at the same time it can support search, forward play, network monitor, record search, download and etc. Support various playback modes: slow play, fast play, backward play and frame by frame play. Support time title overlay so that you can view event accurate occurred time Support customized zoom function during the preview.
Compression Standard System Resources Multiplex operations: Multiple-channel record, playback and network operation simultaneously Interface User-friendly Input Devices Front panel, USB mouse, remote control Input Method Arabic number, English (optional) Shortcut Function Copy/paste operation, USB mouse right-key shortcut menu, double click USB mouse to switch screen. Video Compression H.264 Audio Compression G.
Privacy mask Support one privacy mask of user-defined size in full screen. Support max 4 zones. Image Information Channel information, time information and privacy mask zone. TV Adjust Adjust TV output zone suitable to anamorphic video. Channel Lock Cover secret channel with blue screen though system is encoding normally. Screen-lock function to prevent unauthorized user seeing secret video.
Window Zoom Switch between self-adaptive screen/full screen when playback Partial Enlargement When in one-window full-screen playback mode, you can select any zone to activate partial enlargement function. Backup function HDD backup Backup Mode Support peripheral USB backup device. (Flash disk, portable disk, USB burner and etc.) Support external eSATA device backup Support network download and backup View monitor channel remotely.
RS232 System Information Ordinary COM (Debug),keyboard connection and transparent serial port(COM input and output via network ) Hard Disk Information Display HDD current status Data Stream Statistics Data stream statistics for each channel (in wave mode) Log statistics Backup to 1024 log files. Support various search engines such as time and type. Version Display version information: channel amount, alarm input and output amount, system version and release date.
System Compression Standard Video monitor Main Processor High-performance industrial embedded micro controller OS Embedded LINUX System Resources Multiplex operations: Multiple-channel record, playback and network operation simultaneously Interface User-friendly Input Devices Front panel, USB mouse, remote control Input Method Arabic number, English (optional) Shortcut Function Copy/paste operation, USB mouse right-key shortcut menu, double click USB mouse to switch screen.
Audio Motion Detection Zone setup: support max 396(22×18) zones. Support various sensitivities. Image Quality 6-level image quality (Adjustable) Privacy mask Support one privacy mask of user-defined size in full screen. Support max 4 zones. Image Information Channel information, time information and privacy mask zone. TV Adjust Adjust TV output zone suitable to anamorphic video. Channel Lock Cover secret channel with blue screen though system is encoding normally.
Multi-channel Playback Support single-channel, 4-channel modes. Window Zoom Switch between self-adaptive screen/full screen when playback Partial Enlargement When in one-window full-screen playback mode, you can select any zone to activate partial enlargement function. Backup function HDD backup Backup Mode Support peripheral USB backup device. (Flash disk, portable disk, USB burner and etc.) Support external eSATA device backup Support network download and backup View monitor channel remotely.
System Information Hard Disk Information Display HDD current status Data Stream Statistics Data stream statistics for each channel (in wave mode) Log statistics Backup to 1024 log files. Support various search engines such as time and type. Version Display version information: channel amount, alarm input and output amount, system version and release date.
Compression Standard System Resources Multiplex operations: Multiple-channel record, playback and network operation simultaneously Interface User-friendly Input Devices Front panel, USB mouse, remote control Input Method Arabic number, English (optional) Shortcut Function Copy/paste operation, USB mouse right-key shortcut menu, double click USB mouse to switch screen. Video Compression H.264 Audio Compression G.711 Video Input 4-CH composite video input: (NTSC/PAL) BNC (1.
Privacy mask Support one privacy mask of user-defined size in full screen. Support max 4 zones. Image Information Channel information, time information and privacy mask zone. TV Adjust Adjust TV output zone suitable to anamorphic video. Channel Lock Cover secret channel with blue screen though system is encoding normally. Screen-lock function to prevent unauthorized user seeing secret video.
Window Zoom Switch between self-adaptive screen/full screen when playback Partial Enlargement When in one-window full-screen playback mode, you can select any zone to activate partial enlargement function. Backup function HDD backup Backup Mode Support peripheral USB backup device. (Flash disk, portable disk, USB burner and etc.) Support external eSATA device backup Support network download and backup View monitor channel remotely.
System Information RS485 PTZ control port Support various PTZ control protocols. RS232 Ordinary COM (Debug),keyboard connection and transparent serial port(COM input and output via network ) Hard Disk Information Display HDD current status Data Stream Statistics Data stream statistics for each channel (in wave mode) Log statistics Backup to 1024 log files. Support various search engines such as time and type.
2 Overview and Controls This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first. 2.1 Front Panel This series products’ front panel is shown as below. See Figure 2-1. Figure 2-1 Please refer to the following sheet for front panel button information. Name Icon Function Power button, press this button for three seconds to boot up or shut down DVR.
Increase/decrease numeral. Assistant function such as PTZ menu. Left/ Right Shift current activated control, and then move left and right. W X When playback, click these buttons to control playback bar. Go to previous menu, or cancel current operation. ESC ESC When playback, click it to restore real-time monitor mode. Confirm current operation Enter ENTER Go to default button Go to menu One-window monitor mode, click this button to display assistant function: PTZ control and image color.
For 32 channel device: Indication Light on: 1-16 channel is in recording Indication Light flashes: 17-32 channel is in recording Indication Light normally on: the corresponding channels are in recording Remote control indication light ACT Remote control indication light Status indication light Status If there is Fn indication light, current status indication light is null. Power indication light PWR Power indication light IR Receiver IR It is to receive the signal from the remote control. 2.
12 Alarm input/alarm output 13 Video VGA output 14 HDMI port 15 RS-232 port 16 eSATA port 17 USB port 18 Network port 19 Video CVBS output 20 Video matrix output 21 Full duplex RS-485 port 22 Half duplex RS-485 port 2.2.2 HD-SDI Series This series products’ rear panel is shown as below. See Figure 2-3. Please note there is a special series product has only two audio ports. Figure 2-3 Please refer to the following sheet for detailed information.
17 eSATA port 18 RS-232 port 2.2.3 960H Series This series products’ rear panel is shown as below. See Figure 2-4. Please note there is a special series product does not have the DB25 port. Figure 2-4 Please refer to the following sheet for detailed information.
Please refer to the following figure for detailed information. See Figure 2-5.
HD-SDI Series 960H Series Figure 2-5 21
2.4 Remote Control The remote control interface is shown as in Figure 2-6. Please note remote control is not our standard accessory and it is not included in the accessory bag. Figure 2-6 Serial Number Name Function 1 Power button Click it to boot up or shut down the device. 2 Address Click it to input device number, so that you can control it. 3 Forward Various forward speeds normal speed playback. 4 Slow play Multiple slow play speeds or normal playback.
In normal playback click this button to pause playback. In real-time monitor mode, click this button to enter video search menu. Reverse/pause 8 Reverse playback pause mode, click this button to realize normal playback. In reverse playback click this button to pause playback. Esc. Go back to previous menu or cancel current operation (close upper interface or control) 10 Record Start or stop record manually In record interface, working with the direction buttons to select the record channel.
2.5 Mouse Control Left click mouse System pops up password input dialogue box if you have not logged in. In real-time monitor mode, you can go to the main menu. When you have selected one menu item, left click mouse to view menu content. Implement the control operation. Modify checkbox or motion detection status. Click combo box to pop up drop down list In input box, you can select input methods. Left click the corresponding button on the panel you can input numeral/English character (small/capitalized).
Right click mouse In real-time monitor mode, pops up shortcut menu: one-window, four-window, nine-window and sixteen-window, Pan/Tilt/Zoom, color setting, search, record, alarm input, alarm output, main menu. Among which, Pan/Tilt/Zoom and color setting applies for current selected channel. If you are in multiple-window mode, system automatically switches to the corresponding channel. Exit current menu without saving the modification.
Move the cursor to the text column. Click Fn key and use direction keys to select number you wanted. Please click enter button to input.
3 Installation and Connections Note: All the installation and operations here should conform to your local electric safety rules. 3.1 Check Unpacked DVR When you receive the DVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the DVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list on the warranty card.
4. Place the HDD in accordance 5. Fix the HDD firmly with screws. 6. Install the upper support and fix it to the four holes on the lower firmly. Fix the HDD to the HDD upper bracket support in the same way. 7.Loosen the HDD power wire 8. Insert the power wire inside the DVR. 9. Connect HDD to SATA port with specified data line, then put the cover on the box and fix it firmly. Note: z You can connect the HDD data cable and the power cable first and then fix the HDD in the device.
and suitable lightness. Guarantee the stability and reliability of the camera signal: The camera shall be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. The camera and the DVR should have the same grounding to ensure the normal operation of the camera. Guarantee stability and reliability of the transmission line Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance.
960H Series Figure 3-1 3.6.2 Connecting Video Output Video output includes a BNC(PAL/NTSC, 1.0VP- P， 75Ω）output, a VGA output and a HDMI output. System supports BNC, VGA and HDMI output at the same time. When you are using pc-type monitor to replace the monitor, please pay attention to the following points: z To defer aging, do not allow the pc monitor to run for a long time. z Regular demagnetization will keep device maintain proper status. z Keep it away from strong electromagnetic interference devices.
HD-SDI Series 960H Series Figure 3-2 3.7 Connecting Audio Input & Output, Bidirectional Audio 3.7.1 Audio Input BNC port is adopted for audio input port. Due to high impedance of audio input, please use active sound pick-up. Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose contact and it shall be away from high tension current.
General Series HD-SDI Series 960H Series Figure 3-3 3.7.
The audio output signal parameter is usually over 200mv 1KΩ (BNC). It can directly connect to low impedance earphone, active sound box or amplifier-drive audio output device. If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In this case you can adopt the following measures: z Use better sound pick-up with better directing property. z Reduce the volume of the sound box.
960H Series Figure 3-4 3.
HD-SDI Series 960H Series Figure 3-5 Please read the followings before connecting. 1. Alarm input a. Please make sure alarm input mode is grounding alarm input. b. Grounding signal is needed for alarm input. c. Alarm input needs the low level voltage signal. d. Alarm input mode can be either NC (normal Open) or NO (Normal Close) e. When you are connecting two DVRs or you are connecting one DVR and one other device, please use a relay to separate them, 2.
a. Ensure the decoder has the same grounding with DVR, otherwise you may not control the PTZ. Shielded twisted wire is recommended and the shielded layer is used to connect to the grounding. b. Avoid high voltage. Ensure proper wiring and some thunder protection measures. c. For too long signal wires, 120Ω should be parallel connected between A, B lines on the far end to reduce reflection and guarantee the signal quality. d. “485 A, B” of DVR cannot parallel connect with “485 port” of other device. e.
+12V It is external power input. Need the peripheral equipment to provide +12V power (below 1A). Earth cable. 485 A/B 485 communication port. They are used to control devices such as decoder. T+,T-,R+,R- They are four-wire double duplex RS485 port T+ T-: output wire R+ R-: input wire 3.8.2 Alarm Input Port Please refer to the following sheet for more information. z Grounding alarm inputs.
（Resistance Load） Insulation Surge voltage Maximum switch power 125VA 160W Maximum switch voltage 250VAC, 220VDC Maximum switch currency 1A Between touches with same polarity 1000VAC 1minute Between touches with different polarity 1000VAC 1minute Between touch and winding 1000VAC 1minute Between touches with same polarity 1500V (10×160us) Length of open time 3ms max Length of close time 3ms max Longevity Mechanical 50×106 times (3Hz) Electrical 200×103 times (0.
There are still other interfaces on the DVR, such as USB ports. You can refer to Figure 3-9 for more information.
HD-SDI Series 960H Series Figure 3-9 40
4 Overview of Navigation and Controls Before operation, please make sure: z You have properly installed HDD and all the cable connections. z The provided input power and the device power are matched. z The external power shall be DC 12V. z Always use the stable current, if necessary UPS is a best alternative measure. 4.1 Login, Logout & Main Menu 4.1.1 Login After system booted up, system pops up the startup wizard. Click the Cancel button; you can go to the system login interface.
Figure 4-2 4.1.2 Main Menu After you logged in, the system main menu is shown as below. See Figure 4-3. There are total six icons: search, information, setting, backup, advanced and shutdown. You can move the cursor to highlight the icon, and then double click mouse to enter the sub-menu. Figure 4-3 4.1.3 Logout There are two ways for you to log out. One is from menu option: In the main menu, click shutdown button, you can see an interface is shown as below. See Figure 4-4.
Figure 4-5 The other ways is to press power button on the front panel for at least 3 seconds, system will stop all operations. Then you can click the power button in the rear panel to turn off the DVR. 4.1.4 Auto Resume after Power Failure The system can automatically backup video and resume previous working status after power failure. 4.1.5 Replace Button Battery Please make sure to use the same battery model if possible.
Preview zoom button Figure 4-6 4.2.2 Manual record Note: You need to have proper rights to implement the following operations. Please make sure the HDD has been properly installed. 4.2.2.1 Manual record menu There are two ways for you to go to manual record menu. z Right click mouse or in the main menu, Advanced->Manual Record. z In live viewing mode, click record button in the front panel or record button in the remote control. Manual record menu is shown as in Figure 4-7. 4.2.2.
4.2.2.3 Enable/disable record Please check current channel status: “○” means it is not in recording status, “●” means it is in recording status. You can use mouse or direction key to highlight channel number. See Figure 4-8. Figure 4-8 4.2.2.4 Enable all channel recording Highlight ○ below All, you can enable all channel recording. z All channel schedule record Please highlight “ALL” after “Schedule”. See Figure 4-9.
4.2.2.5 Stop all channel recording Please highlight “ALL” after “Stop”. See Figure 4-11. System stops all channel recording no matter what mode you have set in the menu (Main menu->Setting->Schedule) Figure 4-11 4.3 Search & Playback Click search button in the main menu, search interface is shown as below. See Figure 4-12. Usually there are three file types: z R: Regular recording file. z A: External alarm recording file.
Please refer to the following sheet for more information. SN 1 2 3 4 Name Function Display window zHere is to display the searched picture or file. zSupport 1/4/9/16-window playback. Search type Calendar zThe blue highlighted date means there is picture or file. Otherwise, there is no picture or file. zIn any play mode, click the date you want to see, you can see the corresponding record file trace in the time bar. Playback mode and channel selection pane. zPlayback mode：1/4/9/16.
Click it again to pause current play. In backward play mode, click ►/ to restore normal play. │W/ X│ ► In playback mode, click it to play the next or the previous section. You can click continuously when you are watching the files from the same channel. In normal play mode, when you pause current play, you can click W│ and │X to begin frame by frame playback. In frame by frame playback mode, click ►/ to restore normal playback.
channel. You can adjust the slide bar or input the accurate time to set the file end time. Click this button again and then save current contents in a new file. . 12 Record type In any play mode, the time bar will change once you modify the search type. z 13 Smart search z z z z When system is playing, you can select a zone in the window to begin motion detect. Click the motion detect button to begin play. Current button is null once the motion detect play has begun.
z Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm. Please highlight icon to select the corresponding function. After completing all the setups please click save button, system goes back to the previous menu. At the bottom of the menu, there are color bars for your reference. Green color stands for regular recording, yellow color stands for motion detection and red color stands for alarm recording. The white means the MD and alarm record is valid.
If current channel is not recording, current setup gets activated when the channel begin recording the next time. z If current channel is recording now, current setup will get activated right away, the current file will be packet and form a file, then system begins recording as you have just set. After all the setups please click save button, system goes back to the previous menu. z Figure 4-14 Playback or search in the redundant disk. There are two ways for you to playback or search in the redundant disk.
Figure 4-15 4.4.2.2 Activation Snapshot Please follow the steps listed below to enable the activation snapshot function. After you enabled this function, system can snapshot when the corresponding alarm occurred. z In Encode interface, click snapshot button to input snapshot mode, size, quality and frequency. z In General interface please input upload interval. z In Detect interface please enable snapshot function for specified channels.
4.4.3 Image FTP In Network interface, you can set FTP server information. Please enable FTP function and then click save button. See Figure 4-17. Please boot up corresponding FTP server. Please enable schedule snapshot (Chapter 4.4.2.1) or activation snapshot (Chapter 4.4.2.2) first, now system can upload the image file to the FTP server. Please input the corresponding information here, if you just upload the image FTP. Figure 4-17 4.4.
Select a file and then click here to view image content. Select search engine here You can see result here. Double click file name, you can view the image content. There are max 100 files in one Figure 4-19 page. Click here to view more. 4.5 Detect 4.5.1 Go to Detect Menu In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 4-20.There is three detection types: motion detection, video loss, camera masking. 4.5.2 Motion Detect Detection menu is shown as below.
z z z z z rectangle to set the motion detection zone. After you completed the setup, please click ENTER button to exit current setup. Do remember click save button to save current setup. If you click ESC button to exit the region setup interface system will not save your zone setup. Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity. Show message: System can pop up a message to alarm you in the local host screen if you enabled this function.
Figure 4-21 Figure 4-22 Figure 4-23 Figure 4-24 56
4.5.3 Video Loss In Figure 4-20, select video loss from the type list. You can see the interface is shown as in Figure 4-25.This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function. Tips: You can enable preset activation operation when video loss occurs. Please refer to chapter 4.5.2 motion detection for detailed information. Figure 4-25 4.5.
Figure 4-26 4.6 Alarm Setup and Alarm Activation Before operation, please make sure you have properly connected alarm devices such as buzzer. 4.6.1 Go to alarm setup interface In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 4-27. 4.6.2 Alarm setup Alarm interface is shown as below. See Figure 4-27. z Alarm in: Here is for you to select channel number. z Event type: There are two types. One is local input and the other is network input.
Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled. z Tour: Here you can enable tour function when alarm occurs. System supports one-window tour. Please go to chapter 5.3.9 Display for tour interval setup. z Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs. For snapshot operation, please refer to chapter 4.4.2.
Figure 4-29 Figure 4-30 4.7 Backup DVR support USB device backup and network download. Here we introduce USB backup. You can refer to Chapter 7 Web Client Operation for network download backup operation. 4.7.1 Detect Device Click backup button, you can see an interface is shown as in Figure 4-31. Here is for you to view devices information. You can view backup device name and its total space and free space. The device includes USB burner, flash disk, SD card, and portable HDD.
4.7.1 Backup Select backup device and then set channel, file start time and end time. Click add button, system begins search. All matched files are listed below. System automatically calculates the capacity needed and remained. See Figure 4-32. system only backup files with a √ before channel name. You can use Fn or cancel button to delete √ after file serial number. Click backup button, you can backup selected files. There is a process bar for you reference.
file name, the YDM format is the same as you set in general interface. (Main Menu ->Setting ->General).File extension name is .dav. Tips: During backup process, you can click ESC to exit current interface for other operation. The system will not terminate backup process. Note: When you click stop button during the burning process, the stop function becomes activated immediately.
Figure 4-34 After completing all the setting please click save button. In one window display mode, right click mouse (click “Fn” Button in the front panel or click “Fn” key in the remote control). The interface is shown as in Figure 4-35. Figure 4-35 Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 4-36. Here you can set the following items: z Step: value ranges fro 1 to 8. z Zoom z Focus z Iris Please click icon and to adjust zoom, focus and iris.
Figure 4-36 In Figure 4-36, please click direction arrows (See Figure 4-37) to adjust PTZ position. There are total 8 direction arrows. Figure 4-37 4.8.3 3D Intelligent Positioning Key In the middle of the eight direction arrows, there is a 3D intelligent positioning key. SeeFigure 4-38. Please make sure your protocol supports this function and you need to use mouse to control. Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size.
Pattern Border z z Figure 4-39 In Figure 4-36, click page switch button, the interface is shown as in Figure 4-40. Here you can activate the following functions: z Preset z Tour z Pattern z Auto scan z Auto pan z Flip z Reset z Page switch X328H Figure 4-40 Note: z Preset, tour and pattern all need the value to be the control parameter. You can define it as you require. z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it can be used for special process.
Figure 4-41 4.9.2 Activate Preset In Figure 4-40, please input preset number in the No. blank, and click preset button. 4.9.3 Patrol setup (Tour Setup) In Figure 4-38, click patrol button. The interface is shown as in Figure 4-42.Input preset number and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets. Figure 4-42 4.9.4 Activate Patrol (tour) In Figure 4-39, input patrol (tour) number in the No. blank and click patrol button X341H 4.9.
4.9.6 Activate Pattern Function In Figure 4-39, input mode value in the No. blank, and click pattern button. X346H 4.9.7 Auto Scan Setup In Figure 4-38, click border button. The interface is shown as in Figure 4-43. Please go to Figure 4-35, use direction arrows to select camera left limit Then please go to Figure 4-43 and click left limit button Repeat the above procedures to set right limit. X347H X349H X348H X349H X350H X Figure 4-44 4.9.
5 Understanding of Menu Operations and Controls 5.1 Menu Tree This series DVR menu tree is shown as below. Backup Information HDD Info BPS Log Version Online Users Setting General Encode Schedule RS232 Network Alarm Detect Pan/ Tilt/Zoom Display Default Menu Search Advanced HDD Management Alarm Output Abnormity Manual Record Account Auto Maintain TV Adjust Video Matrix Title Overlay Config Backup Shutdown 5.2 Main Menu After you logged in, the system main menu is shown as below. See Figure 5-1.
Figure 5-1 5.3 Setting In main menu, highlight setting icon and double click mouse. System setting interface is shown as below. See Figure 5-2. Figure 5-2 5.3.1 General General setting includes the following items. See Figure 5-3. z System time: Here is for you to set system time z Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY. z Date separator: There are three denotations to separate date: dot, beeline and solidus. z DST: Here you can set DST time and date.
z z z z z z z z Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybe found in various series.) HDD full: Here is for you to select working mode when hard disk is full. There are two options: stop recording or rewrite.
Figure 5-4 Figure 5-5 5.3.2 Encode Encode setting includes the following items. See Figure 5-6. Please note some series do not support extra stream. z Channel: Select the channel you want. z Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm. You can set the various encode parameters for different record types. z Compression: System supports H.264. z Resolution: System supports various resolutions, you can select from the dropdown list.
Preview/monitor: privacy mask has two types. Preview and Monitor. Preview means the privacy mask zone can not be viewed by user when system is in preview status. Monitor means the privacy mask zone can not be view by the user when system is in monitor status. Time display: You can select system displays time or not when you playback. Please click set button and then drag the title to the corresponding position in the screen.
Function: There are various devices for you to select. Console is for you to use the COM or mini-end software to upgrade or debug the program. The control keyboard is for you to control the device via the special keyboard. Transparent COM (adapter) is to connect to the PC to transfer data directly. Protocol COM is for card overlay function. Network keyboard is for you to use the special keyboard to control the device. PTZ matrix is to connect to the peripheral matrix control.
disable DHCP function to view current IP information. Besides, when PPPoE is operating, you can not modify IP/Subnet mask /Gateway. z TCP port: Default value is 37777. z UDP port: Default value is 37778. z HTTP port: Default value is 80. z RTSP port: Default value is 554. z Max connection: system support maximal 20 users. 0 means there is no connection limit. z Preferred DNS server: DNS server IP address. z Alternate DNS server: DNS server alternate address.
For 960H series only Figure 5-9 5.3.5.1 Advanced Setup Advanced setup interface is shown as in Figure 5-10. Please draw a circle to enable corresponding function and then double click current item to go to setup interface. Figure 5-10 5.3.5.2 IP Filter IP filter interface is shown as in Figure 5-11. You can add IP in the following list. The list supports max 64 IP addresses. Please note after you enabled this function, only the IP listed below can access current DVR.
Figure 5-11 5.3.5.3 NTP Setup You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP OS, you can use command “net start w32time” to boot up NTP service. NTP setup interface is shown as in Figure 5-12. z Host IP: Input your PC address. z Port: This series DVR supports TCP transmission only. Port default value is 123. z Update interval: minimum value is 1. Max value is 65535. (Unit: minute) z Time zone: select your corresponding time zone here.
Figure 5-12 5.3.5.4 Multiple Cast Setup Multiple-cast setup interface is shown as in Figure 5-13. Figure 5-13 Here you can set a multiple cast group. Please refer to the following sheet for detailed information. z IP multiple cast group address -224.0.0.0-239.255.255.255 -“D” address space z The higher four-bit of the first byte=”1110” z Reserved local multiple cast group address -224.0.0.0-224.0.0.255 -TTL=1 When sending out telegraph -For example 224.0.0.1 All systems in the sub-net 224.0.0.
z Used for multiple cast broadcast in limited space. Except the above mentioned addresses of special meaning, you can use other addresses. For example: Multiple cast IP: 235.8.8.36 Multiple cast PORT: 3666. After you logged in the Web, the Web can automatically get multiple cast address and add it to the multiple cast groups. You can enable real-time monitor function to view the view. Please note multiple cast function applies to special series only. 5.3.5.
Figure 5-15 Please note NNDS type includes: CN99 DDNS、NO-IP DDNS、Private DDNS、Dyndns DDNS and sysdns DDNS. All the DDNS can be valid at the same time, you can select as you requirement. Private DDNS function shall work with special DDNS server and special Professional Surveillance Software (PSS). 5.3.5.7 UPNP The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input the router IP address in the LAN in Figure 5-9.
Important: When you are setting the router external port, please use 1024~5000 port. Do not use well-known port 1~255 and the system port 256~1023 to avoid conflict. For the TCP and UDP, please make sure the internal port and external port are the same to guarantee the proper data transmission. Figure 5-16 Figure 5-17 5.3.5.8 Email The email interface is shown as below. See Figure 5-18. z SMTP server: Please input your email SMTP server IP here. z Port: Please input corresponding port value here.
Receiver: Please input receiver email address here. System max supports 3 email boxes. z SSL enable: System supports SSL encryption box. z Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. z Health email enable: Please check the box here to enable this function. This function allows the system to send out the test email to check the connection is OK or not. z Interval: Please check the above box to enable this function and then set the corresponding interval.
FTP service. Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-U Administator. Now you can set user password and FTP folder. Please note you need to grant write right to FTP upload user. See Figure 5-20. Figure 5-20 You can use a PC or FTP login tool to test setup is right or not. For example, you can login user ZHY to FTP://10.10.7.7 and then test it can modify or delete folder or not. See Figure 5-21.
upload the whole file. When setup here is smaller than the actual file length, system only uploads the set length and auto ignore the left section. When interval value is 0, system uploads all corresponding files. After completed channel and weekday setup, you can set two periods for one each channel. Click the Test button, you can see the corresponding dialogue box to see the FTP connection is OK or not. See Figure 5-23. Figure 5-22 Figure 5-23 5.3.5.
z Protocol: Select corresponding PTZ protocol such as PELCOD. z Address: input corresponding PTZ address. z Baud rate: Select baud rate. z Data bit: Select data bit. z Stop bit: Select stop bit. z Parity: There are three choices: none/odd/even. After completed all the setups please click save button, system goes back to the previous menu. For detailed setup, please refer to chapter 4.9 preset/patrol/pattern/scan. Figure 5-24 5.3.9 Display Display setup interface is shown as below. See Figure 5-25.
Please highlight icon to select the corresponding function. After completing all the setups please click save button, system goes back to the previous menu. Figure 5-25 In Figure 5-25, click modify button after channel. You can see an interface is shown as in Figure 5-26. Please note all your modification here applies to local end only. You need to refresh web or client-end to get the latest channel name. System max support 25-digital character.
Figure 5-27 5.3.10 Default Click default icon, system pops up a dialogue box. You can highlight to restore default factory setup. See Figure 5-26. z Select all z General z Encode z Schedule z RS232 z Network z Alarm z Detect z Pan/tilt/zoom z Display z Channel name X381H Please highlight icon to select the corresponding function. After all the setups please click save button, system goes back to the previous menu.
Figure 5-28 5.4 Search Please refer to chapter 4.3 Search. 5.5 Advanced Double click advanced icon in the main window, the interface is shown as below. See Figure 5-29.There are total eight function keys: HDD management, alarm output, abnormity, manual record, account, auto maintenance, TV adjust and video matrix. Figure 5-29 5.5.1 HDD Management Here is for you to view and implement hard disk management. See Figure 5-30. You can see current HDD type, status, capacity and record time.
z z Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-31. (This interface is just like the abnormity setup). Please refer to chapter 5.5.2 for detailed information. HDD operation: You can select HDD mode from the dropdown list such as read-only or you can erase all data in the HDD. Please note system needs to reboot to get all the modification activated. Figure 5-30 Please highlight icon to select the corresponding function.
z HDD Group is only available for read-write HDD and self-defined disks, other types of hard disks cannot be set as HDD Group. Important: z e-SATA also supports this function, you can manage e-SATA hard disk as local hard disk. z Current series software version can only set the HDD group operation of the read-write HDDs. It is not for the redundancy HDD. HDD Setting Click the button “HDD Settings” at the top right corner of the Figure 5-30, system will pop up an interface as below. See Figure 5-32.
and then reboot. Figure 5-33 Channels Setting Click the button named with “Channels Settings” at the top right corner of the Figure 5-30, system will pop up an interface shown as in Figure 5-34. When you are setting the configurations of the channels setting, please select relevant channels first (such as channel 1 to 16), and then select the HDD Group NO. Please click the Save button to save current setup.
Figure 5-35 5.5.2 Abnormity Abnormity interface is shown as in Figure 5-36. z Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict and etc. z Alarm output: Please select alarm activation output port (multiple choices). z Latch: Here you can set corresponding delaying time. The value ranges from 10s-300s. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled.
Please highlight icon to select the corresponding alarm output. After all the setups please click OK button, system goes back to the previous menu. See Figure 5-37. Figure 5-37 5.5.4 Manual Record Please refer to chapter 4.2.2 manual record. 5.5.5 Account Here is for you to implement account management. See Figure 5-38. Here you can: z Add new user z Modify user z Add group z Modify group z Modify password.
After all the setups please click save button, system goes back to the previous menu. Figure 5-38 5.5.5.1 Modify Password Click password button, the interface is shown as in Figure 5-39. Here you can modify account password. Please select the account from the dropdown list, input the old password and then input the new password twice. Click the Save button to confirm current modification. For the users of user account right, it can modify password of other users. Figure 5-39 5.5.5.
record, record file backup, PTZ, user account, system information view, alarm input/output setup, system setup, log view, clear log, upgrade system, control device and etc. The modify group interface is similar to the Figure 5-40. Figure 5-40 5.5.5.3 Add/Modify User Click add user button, the interface is shown as in Figure 5-41. Please input the user name, password, select the group it belongs to from the dropdown list. Then you can check the corresponding rights for current user.
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the files for the specified days. See Figure 5-42. You can select proper setup from dropdown list. After all the setups please click save button, system goes back to the previous menu. Figure 5-42 5.5.7 TV Adjust Here is for you to adjust TV output setup. See Figure 5-43. Please drag slide bar to adjust each item. After all the setups please click OK button, system goes back to the previous menu. Figure 5-43 5.5.
Figure 5-44 5.5.9 Remote Device The remote device interface is shown as in Figure 5-45. Here you can set IPC IP address, port, remote device channel number, user name and its password. IPC port number is 37777; remote device channel number is 1 by default. IPC user name is admin and password is admin. The 4-ch device max. supports 4-ch D1 IPC or 2-ch 720P IPC or 1-ch 1080P IPC. The 8-ch device max. supports 8-ch D1 IPC or 4-ch 720P IPC or 2-ch 1080P IPC. The 16-ch device max.
Note: this device also supports IPCs from the third parties (i.e. Sony, AXIS, Samsung, Panasonic and etc.) 5.5.10 Text Overlay The card overlay function is for financial areas. It includes Sniffer, information analysis and title overlay function. The Sniffer mode includes COM and network. 5.5.10.1 COM Type The COM interface is shown as below. See Figure 5-46. z Protocol: Please select from the dropdown list. z Setting: Click COM setting button, the interface is shown as in RS232 interface.
Figure 5-47 Without the protocol For the ATM/POS without the protocol, the interface is shown as in Figure 5-48. Source IP refers to host IP address that sends out information (usually it is the device host.) Destination IP refers to other systems that receive information. Usually you do not need to set source port and target port. There are total four groups IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal.
Figure 5-49 5.5.11 Config File Backup The configuration file backup interface is shown as below. See Figure 5-50. This function allows you to copy current system configuration to other devices. Figure 5-50 5.6 Information Here is for you to view system information. There are total five items: HDD (hard disk information), BPS (data stream statistics), Log and version, and online user. See Figure 5-51.
Figure 5-51 5.6.1 HDD Information Here is to list hard disk type, total space, free space, video start time and status. See See Figure 5-52.○ means current HDD is normal. X means there is error. - means there is no HDD. X391H If disk is damaged, system shows as “?”. Please remove the broken hard disk before you add a new one. Once there is a hard disk confliction, please check hard disk time and system time is the same or not. Please go to setting then general to modify system time.
Tips: Please click Fn button or left click mouse to view HDD record time and HDD type and time. 5.6.2 BPS Here is for you to view current video data stream (KB/s) and occupied hard disk storage (MB/h). See Figure 5-53. Figure 5-53 5.6.3 Log Here is for you to view system log file. System lists the following information. See Figure 5-54. Log types include system operation, configuration operation, data management, alarm event, record operation, log clear and etc.
Figure 5-54 Click the Details button or double click the log item, you can view the detailed information. See Figure 5-55. Figure 5-55 5.6.4 Version Here is for you to view some version information. See Figure 5-56.
Figure 5-56 5.6.5 Online Users Here is for you manage online users. See Figure 5-57. You can disconnect one user or block one user if you have proper system right. Max disconnection setup is 65535 seconds. Figure 5-57 5.7 Shutdown Double click shutdown button, system pops up a dialogue box for you to select. See Figure 5-58 z Logout menu user: log out menu. You need to input password when you login the next time. z Restart application: reboot DVR. z Shutdown: system shuts down and turns off power.
Figure 5-58 104
6 About Auxiliary Menu 6.1 Go to Pan/Tilt/Zoom Menu In the one-window surveillance mode, right click mouse (click “fn” Button in the front panel or click AUX key in the remote control). The interface is shown as below: See Figure 6-1. X397H X Figure 6-1 Click Pan/Tilt/Zoom, the interface is shown as in Figure 6-2. Here you can set the following items: z Zoom z Focus z Iris Please click icon and to adjust zoom, focus and Iris.
front panel.) Figure 6-3 6.1.1 3D Intelligent Positioning Key In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 6-4 . Please make sure your protocol supports this function and you need to use mouse to control. Click this button, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size. X401H X Figure 6-4 Here is a sheet for you reference.
Here you can activate the following functions: z Preset z Tour(Patrol) z Pattern z Auto scan z Auto pan z Flip z Page Switch Figure 6-6 6.2.1 Preset Setup Note: The following setups are usually operated in the Figure 6-2, Figure 6-5 and Figure 6-6. In Figure 6-2, use eight direction arrows to adjust camera to the proper position. In Figure 6-5, click preset button and input preset number. The interface is shown as in Figure 6-7.
Figure 6-8 6.2.4 Activate Patrol In Figure 6-6, input patrol number in the No. blank and click patrol button X41H X 6.2.5 Pattern Setup In Figure 6-5, click pattern button and then click begin button. The interface shows like Figure 6-9. Please go to Figure 6-2 to modify zoom, focus, and iris. Go back to Figure 6-9 and click end button. You can memorize all these setups as pattern 1. X415H X416H X X X417H X X418H X Figure 6-9 6.2.
Figure 6-10 6.2.8 Activate Border Function In Figure 6-6, click auto scan button, the system begins auto scan. Correspondingly, the auto scan button changes to stop button. Click stop button to terminate scan operation. X42H 6.2.9 X Flip In Figure 6-6, click page switch button, you can see an interface is shown as below. See Figure 6-11. Here you can set auxiliary function. Click page switch button again, system goes back to Figure 6-2.
7 WEB CLIENT OPERATION There might be slightly difference in the interface due to different series. 7.1 Network Connection Before web client operation, please check the following items: z Network connection is right z DVR and PC network setup is right. Please refer to network setup(main menu->setting->network) z Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not. Usually the return TTL value should be less than 255. z Open the IE and then input DVR IP address.
Figure 7-2 After installation, the interface is shown as below. See Figure 7-3. Please input your user name and password. Default factory name is admin and password is admin. X430H X Note: For security reasons, please modify your password after you first login.
After you logged in, you can see the main window. See Figure 7-6. This main window can be divided into the following sections. z Section 1: there are five function buttons: configuration (chapter 7.3), search (chapter 7.4), alarm (chapter 7.5), about (chapter 7.6), log out (chapter 7.7). z Section 2: there are channel number and three function buttons: start dialog and local play, refresh. z Section3: there are PTZ (chapter 7.2.2), color (chapter 7.2.
Figure 7-6 7.2.1 Real-time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in current window. On the top left corner, you can view device IP, channel number, network monitor bit stream. 1 2 3 Figure 7-7 On the top right corer, there are six unction buttons. See Figure 7-8. X43H 1 2 3 4 5 X 6 Figure 7-8 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. right click mouse system restores original status.
Figure 7-9 Open All You can click it to open all channels. Refresh You can use button to refresh camera list. Start Dialogue You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are two options: DEFAULT/G711a. Please note, the audio input port from the device to the client-end is using the first channel audio input port. During the bidirectional talk process, system will not encode the audio data from the 1-channel.
file. See Figure 7-10. X436H X Figure 7-10 7.2.2 PTZ Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter 7.3.2 Setting-> Pan/Tilt/Zoom). Click PTZ button, the interface is shown as in Figure 7-11. X437H X 3D Intelligent Positioning Key You can click this icon to display or hide the PTZ control platform.
7.2.2.1 Direction key and 3D positioning key In Figure 7-10, there are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. Click 3D intelligent positioning key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size. It can realize PTZ automatically. 7.2.2.2 Speed System supports eight-level speed. You can select from the dropdown list. Speed 2 is faster than speed 1. 7.2.2.
click stop record button. Now you have set one pattern. 7.2.2.6 Preset In Figure 7-12, move the camera to your desired location and then input preset value. Click add button, you have set one preset. X41H X 7.2.2.7 Auto tour In Figure 7-12, input auto tour value and preset value. Click add button, you have added one preset in the tour. Repeat the above procedures you can add more presets in one tour. X42H X 7.2.2.8 Assistant You can select the assistant item from the dropdown list. See Figure 7-13.
Figure 7-14 7.2.4 Picture Path and Record Path Click more button in Figure 7-14, you can see an interface is shown as in Figure 7-15. X45H X X46H X Figure 7-15 Click the record item; you can see there are two options: DAV/ASF. Click picture path button, you can see an interface is shown as in Figure 7-16. Please click choose button to modify path. X47H X Figure 7-16 Click record path button, you can see an interface is shown as in Figure 7-17. Please click choose button to modify path.
Figure 7-18 If there is local use logged in the system menu, or the Web logged in user has no right to reboot the device system pops up a dialogue box to alert you. 7.3 Configure 7.3.1 System Information 7.3.1.1 Version Information Here you can view device hardware feature and software version information. See Figure 7-19. X49H X Figure 7-19 7.3.1.2 HDD information Here you can view local storage status and network status including, free capacity and total capacity. See Figure 7-20.
Figure 7-20 7.3.1.3 Log Here you can view system log. See Figure 7-21. X451H X Figure 7-21 Click backup button, the interface is shown as in Figure 7-22.
Figure 7-22 Please refer to the following sheet for log parameter information. Parameter Function Type Log types include: system operation, configuration operation, data management, alarm event, record operation, user management, log clear and file operation. Search You can select log type from the drop down list and then click search button to view the list. Start time Please input start time here. End time Please input the end time here.
Figure 7-23 Figure 7-24 Figure 7-25 Please refer to the following sheet for detailed information. Parameter Function System Time Here is for you to modify system time.
Sync PC You can click this button to save the system time as your PC current time. Data Format Here you can select data format from the dropdown list. Data Separator Please select separator such as – or /. Time Format There are two options: 24-H and 12-H. DST Here you can set day night save time begin time and end time. See Figure 7-24 and Figure 7-25. Language You can select the language from the dropdown list. Device needs to reboot to get the modification activated.
Figure 7-26 Figure 7-27 Please refer to the following sheet for detailed information. Parameter Function Channel Here is for you to select a monitor channel. Channel Name Here is to display current channel name. You can modify it. Compression H.264 Main Stream It includes main stream, motion stream and alarm stream. You can select different encode frame rates form different recorded events. System supports active control frame function (ACF). It allows you to record in different frame rates.
Parameter Function need to draw a circle here to enable audio function. For extra stream, you need to draw a circle to select the video first and then select the audio if necessary. Resolution System supports various resolutions, you can select from the dropdown list. Please note the option may vary due to different series. The general series The main stream supports D1/HD1/2CIF/CIF/QCIF and the 1-16-channe extra stream supports CIF/QCIF.
Parameter Copy Function OSD transparent value ranges from 0 to 255. 0 means complete transparent. You can use the mouse to drag the channel tile position. It is a shortcut menu button. You can copy current channel setup to one or more channels. The interface is shown as in Figure 7-28. X45H X Save You can click save button after you complete setup for one channel, or you can complete the whole setups and then click save button.
Figure 7-29 Figure 7-30 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel first. Pre-record Please input pre-record value here. System can record the three to five seconds video before activating the record operation into the file. (Depends on data size). Setup In Figure 7-29, click set button, you can go to the corresponding setup interface.
Parameter Function and alarm/snapshot. Copy Please select date (Current setup applies to current day by default. You can draw a circle before the week to apply the setup to the whole week.) After complete setup, please go back to Figure 7-29 and then click save to save current time period setup. X459H X It is a shortcut menu button. You can copy current channel setup to one or more (all) channels. The interface is shown as in Figure 7-28.
Parameter Function Data Bit The value ranges from 5 to 8. Stop Bit There are three options: 1/2. Baud Bit You can select corresponding baud bit here. Parity There are five options: none/odd/even/space/mark. System default setup is: z Function: Console. z Data bit: 8 z Stop bit: 1 z Baud bit: 115200 z Parity: None. 7.3.2.5 Network Network interface is shown as in Figure 7-32.
For 960H series only Figure 7-32 Please refer to the following sheet for detailed information. Parameter Function Network Mode Includes multiple access, fault tolerance, and load balancing Default Network Card Please select eth0/eth1/bond0(optional) multiple access function Ethernet Please select eth0/eth1 (optional).after enable multiple access function.
Parameter Function Network Mode Includes multiple access, fault tolerance, and load balancing Default Network Card Please select eth0/eth1/bond0(optional) multiple access function Ethernet Please select eth0/eth1 (optional).after enable multiple access function. after enable Note: The 960H series support the above three configurations and supports functions as multiple access, fault-tolerance and load balancing.
Parameter Function Password The sender email account password. Sender Sender email address. Subject Input email subject here. Max 32-digit. Address Input receiver email address here. Max input three addresses. Support SSL encryption mailbox. Health mail enable Please check the box here to enable this function. Health mail interval Please check the above box to enable this function and then set the corresponding interval.
Parameter Function Server Port DDNS server port. Domain Name Your self-defined domain name. User The user name you input to log in the server. Password The password you input to log in the server. Interval Device sends out alive signal to the server regularly. You can set interval value between the device and DDNS server here. NAS NAS interface is shown as in Figure 7-35. Please make sure your DVR support this function.
Parameter Function length and auto ignore the left section. When interval value is 0, system uploads all corresponding files. Password The password you need to log in the server. Remote Path Remote storage file path. Save You can click save button after you complete setup for one channel, or you can complete the whole setups and then click save button. Refresh Click this button to get device latest configuration information. NTP The NTP interface is shown as in Figure 7-36.
Bangkok Beijing (Hong Kong) Tokyo Sydney Hawaii Alaska Pacific Time(P.T) American Mountain Time(M.T) American Central Time(C.T) American Eastern Time(E.T) Atlantic Time Brazil Middle Atlantic Time GMT+7 GMT+8 GMT+9 GMT+10 GMT-10 GMT-9 GMT-8 GMT-7 GMT-6 GMT-5 GMT-4 GMT-3 GMT-2 Alarm Centre Alarm centre interface is shown as below. See Figure 7-37. This interface is for you to develop. The alarm signal can be uploaded to the alarm centre when there is local alarm.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. Note: After PPPoE successful dial, you need to go to the device local end to get device current IP address and then use the client-end to access this IP address. Figure 7-38 UNPN Go to the UPnP interface, you can see an image is shown as in Figure 3-39. It allows you to establish the mapping relationship between the LAN and the public network.
7.3.2.6 Alarm Alarm setup interface is shown as in Figure 7-40. Please make sure you have connected the corresponding alarm output device such as the light, buzzer and etc. Figure 7-40 Figure 7-41 Please refer to the following sheet for detailed information. Parameter Function Event Type It includes local alarm/network alarm. Local alarm: Device detects alarm from input port. Network: Device detects alarm from network. Alarm in Select corresponding alarm channel.
Parameter Function signal. Type There are two options: normal open and normal close. NO becomes activated in low voltage, NC becomes activated in high voltage. Period Alarm record function becomes activated in the specified periods. There are six periods in one day. Please draw a circle to enable corresponding period. Select date. If you do not select, current setup applies to today only. You can select all week column to apply to the whole week.
Parameter Function you can complete the whole setups and then click save button. Refresh Click this button to get device latest configuration information. 7.3.2.7 Detect Analysis the video, system enable motion detection alarm when it detects the motion signal reached the specified sensitivity. The detection interface is shown as in Figure 7-42. Figure 7-42 Figure 7-43 Please refer to the following sheet for detailed information.
Parameter Function Event Type There are three types: Motion detection/video loss/Camera Masking. Channel Select channel name from the dropdown list. Enable You need to draw a circle to enable motion detection function. Sensitivity There are six levels. Region There are six levels. Region: If you select motion detection type, you can click this button to set motion detection zone. The interface is shown as in Figure 7-43. There are PAL 22X18/NTSC 22X15 zones.
Parameter Function when alarm occurs and ends. Tour Display the selected video in local monitor window. Tour interval and tour mode are set in DVR local menu (chapter 5.3.9 Display ) PTZ Activation Here you can set PTZ movement when alarm occurs. Such as go to preset x when there is an alarm. Capture You need to input capture channel number so that system can backup motion detection snapshot file. Matrix Enable Please note this function is valid in motion detect mode.
Figure 7-44 Please refer to the following sheet for detailed information. Parameter Function Channel You can select monitor channel from the dropdown list. . Protocol Select the corresponding dome protocol.(such as PELCOD) Address Set corresponding dome address. Default value is 1. Please note your setup here shall comply with your dome address; otherwise you can not control the speed dome. Baud Rate Select the dome baud rate. Default setup is 9600. Data Bit Default setup is 8.
Figure 7-45 Please refer to the following sheet for detailed information. Parameter Function Select All Restore factory default setup. Export Configuration Export system configuration to local PC. Import Configuration Import configuration from PC to the system. 7.3.3 Advanced 7.3.3.1 HDD Management HDD management includes net storage management and local storage management. Please note, if you want to use local storage function, your storage device need to support current function.
Figure 7-46 Please refer to the following sheet for detailed information. Parameter Function Format Clear data in the disk. Read/write Set current disk as read/write Read only Set current disk as read. Redundant Set current disk as redundant disk. Recover Recover dada after error occurs. Use as snapshot Set current disk as snapshot disk. Please note system needs to reboot to activate current setup. 7.3.3.2 Alarm I/O Here you can search alarm output status. See Figure 7-47.
Figure 7-47 Important The alarm output port should not be connected to high power load directly (It shall be less than 1A) to avoid high current which may result in relay damage. Please use the co contactor to realize the connection between the alarm output port and the load. Please refer to the following sheet for detailed information. Parameter Function Alarm output There are three output channels (Multiple choices).
Figure 7-48 Please refer to the following sheet for detailed information. Parameter Function Auto System enables auto record function as you set in record schedule setup. Manual Enable corresponding channel to record no matter what period applied in the record setup. Stop Stop current channel record no matter what period applied in the record setup. Operation here is the same to chapter 4.2 Manual Record. Please refer to chapter 4.2 for detailed information. 7.3.3.
Figure 7-49 7.3.3.5 Auto Maintenance Here you can select auto reboot and auto delete old files interval from the dropdown list. See Figure 7-50.
7.3.3.6 Snapshot Snapshot interface is shown as in Figure 7-51. Figure 7-51 Please refer to the following sheet for detailed information. Parameter Function Channel It is the monitor channel. Snapshot mode There are two modes: Timing and activation. Frame rate You can select from the dropdown list. The value ranges from 1f/s to 7f/s. Resolution different choices for different models. Quality You can select from the dropdown list. Here is for you to set video quality.
Figure 7-52 Please refer to the following sheet for detailed information. Parameter Function Event Type The abnormal events include: no disk, no space, disk error, net error. You need to draw a circle to enable this function. Normal Out The corresponding alarm activation output channel when alarm occurs, There are six channels. Latch The alarm output can delay for the specified time after alarm stops. Then system disables alarm and corresponding activation output.
Figure 7-53 7.3.3.9 Remote Device Here you can set IPC address, port, remote device channel number, login user name and its password. Now system supports 4 channel IPC connections (channel 17 to channel 20). See Figure 7-52. Please refer to chapter 5.5.9 Remote Device for detailed information.
7.3.4 Additional Function 7.3.4.1 Preferred DNS Here you can set server or local operator DNS address. See Figure 7-54. Figure 7-55 7.3.4.2 Card Overlay Tit is the same with the card overlay function (chapter 5.5.9). It is mainly for financial areas to Sniffer, information parse and character overlay. The ATM/POS interface is shown as in Figure 7-55. Source IP refers to host IP address that sends out information (usually it is the device host connected to the DVR.
Figure 7-56 7.3.4.3 Auto Register Auto register interface is shown as below. See Figure 7-56. Figure 7-57 Auto Register Please refer to the following sheet for detailed information. Parameter Function Enable Enable auto register function.
No. Device management server number. IP Device management server IP address. Port Server port number. Device ID Device ID in the device management server. 7.4 Search Click search button, you can see an interface is shown as in Figure 7-57. The record type includes the general record, alarm record, motion detect record, local record, picture, card number record. Please select record playback mode, and then select start time, end time and channel.
Figure 7-59 Now you can see system begins download and the download button becomes stop button. You can click it to terminate current operation. At the bottom of the interface, there is a process bar for your reference. See Figure 7-59. Figure 7-60 When download completed, you can see a dialogue box shown as in Figure 7-60. Please click OK to exit.
Figure 7-61 Please refer to the following sheet for detailed information. Type Parameter Function Type Record Search general record, alarm record and motion detection record. Alarm Search alarm record. Motion Detection Search motion detection record. Local Search local record. Snapshot Search snapshot file. Card Search card file. Begin time Set the file start time. You can select from the dropdown list. End time Set the file end time.
Type Multiple-channel playback Parameter Function Earliest record Select a channel first and then click the earliest record button; you can view the earliest record of the current channel in the HDD. System supports playback one file in several monitor channels. During the playback process, you can see there are control buttons such as play, pause, stop. slow play and fast play in the play process bar. You can view current playback file channel name, time and data statistics.
7.5 Alarm Click alarm function, you can see an interface is shown as in Figure 7-62. Here you can set device alarm type and alarm sound setup. X483H Figure 7-63 Please refer to the following sheet for detailed information. Please make sure current device can upload the alarm. Type Parameter Function Alarm Type Video loss System alarms when video loss occurs. Motion detection System alarms when motion detection alarm occurs, Disk full System alarms when disk is full.
Type Parameter Function Sound pop up System sends out alarm sound when alarm occurs. You can specify as you wish. Path Here you can specify alarm sound file. 7.6 About Click about button, you can view current web client information. See Figure 7-63. Figure 7-64 7.7 Log out Click log out button, system goes back to log in interface. See Figure 7-64. You need to input user name and password to login again.
7.8 Un-install Web Control You can use web un-install tool “uninstall web.bat” to un-install web control. Please note, before you un-installation, please close all web pages, otherwise the un-installation might result in error.
8 Professional Surveillance System Besides Web, you can use our Professional Surveillance Software (PSS) to login the device. For detailed information, please refer to PSS user’s manual.
9 FAQ 1. DVR can not boot up properly. There are following possibilities: z Input power is not correct. z Power connection is not correct. z Power switch button is damaged. z Program upgrade is wrong. z HDD malfunction or something wrong with HDD ribbon. z Seagate DB35.1，DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem. z Front panel error. z Main board is damaged. 2. DVR often automatically shuts down or stops running.
z DVR and monitor resistance is not compatible. z Video transmission is too long or degrading is too huge. z DVR color or brightness setup is not correct. 6. Can not search local records. There are following possibilities: z HDD ribbon is damaged. z HDD is broken. z Upgraded program is not compatible. z The recorded file has been overwritten. z Record function has been disabled. 7. Video is distorted when searching local records.
z PTZ decoder setup, connection or installation is not correct. z Cable connection is not correct. z PTZ setup is not correct. z PTZ decoder and DVR protocol is not compatible. z PTZ decoder and DVR address is not compatible. z When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable. z The distance is too far. 12. Motion detection function does not work.
z MAC address conflict. z PC or DVR network card is not good. 16. Burn error /USB back error. There are following possibilities: z Burner and DVR are in the same data cable. z System uses too much CPU resources. Please stop record first and then begin backup. z Data amount exceeds backup device capacity. It may result in burner error. z Backup device is not compatible. z Backup device is damaged. 17. Keyboard can not control DVR.
z Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct. z HDD capacity is not enough. z HDD is damaged. 22. Can not playback the downloaded file. There are following possibilities: z There is no media player. z No DXB8.1 or higher graphic acceleration software. z There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. z No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. 23.
Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity qi that is the capacity of each channel needed for each hour, unit Mbyte.
448K 196M 512K 225M 640K 281M 768K 337M 896K 393M 1024K 450M 1280K 562M 1536K 675M 1792K 787M 2048K 900M 167
Appendix B Compatible backup devices Appendix B-1 Compatible USB list Manu factor Model Capacity Sandisk Cruzer Micro 512M Sandisk Cruzer Micro 1G Sandisk Cruzer Micro 2G Sandisk Cruzer Freedom 256M Sandisk Cruzer Freedom 512M Sandisk Cruzer Freedom 1G Sandisk Cruzer Freedom 2G Kingston DataTraveler Ⅱ 1G Kingston DataTraveler Ⅱ 2G Kingston DataTraveler 1G Kingston DataTraveler 2G Maxell USB Flash Stick 128M Maxell USB Flash Stick 256M Maxell USB Flash Stick 512M
Kingston Data Traveler 32GB Aigo L8315 16GB Sandisk 250 16GB Kingston Data Traveler Locker+ 32GB Netac U228 8GB Appendix B-2 Compatible SD Card list Brand Standard Capacity Card type Transcend SDHC6 16GB Big Kingston SDHC4 4GB Big Kingston SD 2GB Big Kingston SD 1GB Big Sandisk SDHC2 8GB Small Sandisk SD 1GB Small Appendix B-3 Compatible Portable HDD list Brand Model Capacity YDStar YDstar HDD box 40G Netac Netac 80G Iomega Iomega RNAJ50U287 WD Elements
Sumsung TS-H653 Sony DRU-V200S Sony DRU-845S Sumsung TS-H653 Pioneer DVR-217CHG LG GH22NS30 Appendix B-6 Compatible SATA HDD List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. And SATA HDD should be used for the DVR with SATA port. Manufacturer Series Model Capacity Port Mode Seagate Barracuda.10 ST3750640AS 750G SATA Seagate Barracuda.10 ST3500630AS 500G SATA Seagate Barracuda.10 ST3400620AS 400G SATA Seagate Barracuda.
Seagate SV35.5 ST3250311SV 250G SATA Seagate SV35.5 ST3500410SV 500G SATA Seagate SV35.5 ST31000525SV 1TB SATA Seagate SV35.
Western Digital Western digital WD20EURS-63Z9B1 2TB SATA Western Digital Western digital WD10EURS-630AB1 1TB SATA SAMSUNG / HA101UJ/CE 1T SATA SAMSUNG Spinpoint HA751LJ 750G SATA SAMSUNG / HA101UJ/CE 1TB SATA SAMSUNG / HD103SI/CE 1TB SATA SAMSUNG / HD154UI/CE 1.
Appendix C Compatible CD/DVD Burner List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. And you can use the USB cable with the model recommended to set USB burner.
Appendix D Compatible Displayer List Please refer to the following sheet form compatible displayer list.
Appendix E Compatible Switcher Brand Model network working mode D-LinK DES-1016D 10/100M self-adaptive D-LinK DES-1008D 10/100M self-adaptive Ruijie RG-S1926S Five network modes 1. AUTO 2. HALF-10M 3. FULL-10M 4 .HALF-100M 5.
Appendix F Compatible Wireless Mouse List Please refer to the following sheet for compatible SD card brand.
Appendix G Earthing 1. What is the surge? Surge is a short current or voltage change during a very short time. In the circuit, it lasts for microsecond. In a 220V circuit, the 5KV or 10KV voltage change during a very short time (about microseconds) can be called a surge. The surge comes from two ways: external surge and internal surge. z The external surge: The external surge mainly comes from the thunder lightning. Or it comes from the voltage change during the on/off operation in the electric power cable.
Signal lightning arrester: This device is mainly used in the PC network, communication system. The connection type is serial connection. Once you connected the signal lightning arrestor with the signal port, it can cut the channel of the thunderstorm to the device, and on the other hand, it can discharge the current to the ground to guarantee the device proper work.
conductance of the ground conductor. In the high-frequency circuit, you need to use the multiple-point ground mode and each cable needs to connect to the ground. The length shall be less than the 1/20 of the signal wavelength. Mixed ground: The mix ground consists of the feature of the one-point ground and multiple-point ground. For example, the power in the system needs to use the one-point ground mode while the radio frequency signal requires the multiple-point ground.
z z z z z The thunder proof ground shall adopt the special ground cable from the monitor control room to the ground object. The ground cable adopts copper insulation cable or wire and its ground section shall be more than 20mm2. The ground cable of the monitor system can not short circuit or mixed connected with the strong alternative current cable.
For L (live cable) Turn the digital multimeter to 750V AC, use your one hand to hold the metal end, and then the other hand insert the pen to the L port of the socket. See the following figure. If the multimeter shows 120, then you can see current live cable connection is standard. If the value is less than 60, then you can see current live cable connection is not proper or it is not the live cable at all.
182
Appendix H Toxic or Hazardous Materials or Elements Component Name Toxic or Hazardous Materials or Elements Pb Hg Cd Cr VI PBB PBDE Sheet Metal(Case) ○ ○ ○ ○ ○ ○ Plastic Parts （Panel） ○ ○ ○ ○ ○ ○ Circuit Board ○ ○ ○ ○ ○ ○ Fastener ○ ○ ○ ○ ○ ○ Wire and Cable/AC Adapter ○ ○ ○ ○ ○ ○ Packing Material ○ ○ ○ ○ ○ ○ Accessories ○ ○ ○ ○ ○ ○ O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the rele
