Instruction Manual

137
Figure 7-32
Please refer to the following sheet for detailed information.
Parameter Function
Network Mode Includes multiple access, fault tolerance, and load balancing
Default Network
Card
Please select eth0/eth1/bond0(optional) after enable multiple
access function
Ethernet Please select eth0/eth1(optional).after enable multiple access
function.
Note: 960H series support the above three configurations and supports functions
as multiple access, fault-tolerance and load balancing.
TCP Port Default value is 37777.
HTTP Port Default value is 554.
UDP Port Default value is 37778.
Max Connection Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Email
The email interface is shown as in
X463H463H463HFigure 7-33X.