User`s guide

84 | P a g e
8-6. Setup of UMS Multi Client
Click the setup icon to setup the configuration of UMS Multi Client software. The SETUP window is
displayed as below.
8-6-1. General
8-6-1-1. Security Option: Set a password for security options.
Select security options and set a password.
Then when you access any of selected functions, you need to enter the password.
You can also set the save path for capturing and backup.
8-6-1-2. Save Path: Specify the location to save captured still image for Capture and Backup data.
8-6-1-3. Miscellaneous
Automatic reconnection: If a user selects this function, client S/W will automatically try to connect the finally
connected IP address, after the network is disconnected.
Always On Top: If a user selects this function, client S/W will display continuously at the very front than other software on the PC.
Time Format: Change the way the Client software displays the time.