User`s guide

37 | P a g e
Analog DVR
CIF
Half D1
D1
N-0440MH
120fps/4CH
120fps/4CH
120fps/4CH
N-0840MH
240fps/8CH
240fps/8CH
120fps/8CH
N-1640MH
480fps/16CH
240fps/16CH
120fps/16CH
HD-SDI DVR
640 x 360
1280 x 720
1920 x 1080
HD-0405M
120fps/4CH
48fps/4CH
20fps/4CH
HD-0810M
240fps/8CH
96fps/8CH
40fps/8CH
QUALITY
Select the recording quality for the specified channel. LEVEL 1 ~ LEVEL 5
(Allows the user to change the recording QUALITY of the selected
CHANNEL)
RECORDING
Assign the recording mode for each channel. Options are: Continuous, By
Motion, By Sensor, By Schedule or Disable.
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 5 seconds to
20 Minutes.
POST EVENT RECORD
Set the post event recording time duration for the specified channel. (10~60
seconds)
SENSOR RECORDING
Enable setting up to 4 sensors for the specified channel using the mouse or the
control button of the remote control.
AUDIO
Enable/disable audio recording for the specified channel.
SCHEDULE
Set the recording schedule. Press SEL to enter the schedule setup screen.
3-3-1. Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the menu items using the
mouse or the control button on the remote control.
[Channel]: Select the specific channel.
[Setup]: Set up using the left button of the mouse to section under the specific day and time. It can set the all section
under the specific day or time at a time when pressing the specific day or time. It is also possible to set up
recording modes of various type using a CONTINUOUS (green), Motion (yellow) and Sensor (red). Left-Click
and drag the mouse to change the schedule for more than one timeslot.
[COPY Schedule]: To copy the schedule setup from one channel to another, select the channel to copy using the
mouse or the buttons on the remote control, and select to channel to copy to and press the select button. Select
OK to confirm the changes.