User`s guide

112 | P a g e
B. How to access DVR from a Remote PC?
LAN Connection – Using a Switching Hub
Connect an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN Cable) from the system to a router (hub)
1. Run the pre-install the network client software on the supplied CD.
2. Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR.
3. Run network client software and click button.
4. Input Site Name, Site Address (IP address), Port No., and Password on the connect window.
o Site Name: Input a name that properly describes a site.
o IP Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain
name that is registered at www.ddnscenter.com