User`s manual

HD/SD Digital Video Switcher DSC945. User’s Manual
How to update the DSC945 Firmware
Customers can update the DSC945C firmware themselves if they wish or they can contact their
local dealer or reseller for assistance should they prefer this method.
Once started the update process should not be interrupted in any way as this could result in a
non-responsive unit.
To update the DSC945 firmware:
1. Switch off the DSC945 and Computer in the normal way.
2. Connect the Ethernet cable between the DSC945 rear panel and the Computer.
3. Turn on the Windows 7 Computer.
5. Double click the firmware update icon to launch the Flash Update Utility.
6. Confirm the supported devices list says DSC945 then click NEXT.
7. Select Device is connected via Ethernet then click NEXT.
8. In the next window you can POWER ON the DSC945 and it will be discovered by the
Computer.
9. Select Automatically update the device to latest firmware version then click NEXT.
10. Click the Yes button to confirm you wish to perform the firmware update.
11. The update process will begin and two progress bars will be shown. The lower bar, Total
Progress, will take around 15 minutes to complete.
12. Once this process is complete close the application and power cycle the DSC945.
DVLab 29