Owner manual

-4-
3. PACKAGE CONTENTS
Beforestartinginstallation,pleasecheckthepackagecontents:
• 1xDVI-7360-TxTransmitterUnit
• 1xDVI-7360-RxReceiverUnit
• 1xIRTransmitter(p.n.DVI-7360-IR-TX)
• 1xIRReceiver(p.n.DVI-7360-IR-RX)
• 2xExternalACPowerAdapters(p.n. DVI-7205-PS)
• 1xUserGuide
4. INSTALLATION
This product includes both a Transmitter and a Receiver unit. The Transmitter
unit should be connected to the HDMI output port of the signal source (such
asaPCorBluRayplayer).TheReceivershouldbeconnectedtotheHDMI
input port of a digital display. This product may be connected to a DVI source
and/or display using a DVI to HDMI cable (DVIGear p.n. DVI-24xx-HR, where
xx = length in meters).
The HDMI signal components are routed from the Transmitter unit to the
Receiver unit using an optical cable with two (2) bers that are terminated with
LC optical connectors. The optical cable may use either single-mode or multi-
mode ber. The longest cable distances may be obtained with single-mode
ber. Systems that require HDCP support are limited to cable distance of 350
meters (1,150 ft.).