DVI-DUser FiberGuide Optic Cable Dual-Link DVI Fiber Optic Extender DVI-7320
TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PRODUCT LIABILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. PACKAGE CONTENTS. . . . . . . . . . . . . . . .
! WARNING – Product Safety 1. Do not dismantle the product’s housing or modify the printed circuit board module as this may result in electrical shock or burn. 2. Do not attempt to service this product yourself as opening or removing the product housing may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 3. Keep this product away from liquids as spills into the product housing may result in fire, electrical shock, or equipment damage.
1. INTRODUCTION The DVI-7320 Dual-Link DVI Fiber Optic Extender enables the transmission of both single-link and dual-link DVI signals at distances up to 500 meters (100 meters with real DDC support) without any signal degradation. This makes it an ideal solution for applications where a dual-link DVI display must be extended from the signal source without introducing artifacts in the image. Our professional digital distribution products have been serving the industry for over ten (10) years.
3. SPECIFICATIONS General Specifications Maximum Pixel Clock Rates up to 330 MHz Maximum Bit-Rates up to 1.65 Gbps. per TMDS channel Maximum Supported Resolutions Single-Link Mode: Dual-Link Mode: up to 1920x1200, 1600x1200, 2048x1080 up to 3840×2400 Connector Types DVI Ports: Optical Ports: DDC Port: DC Power: 29-pin DVI female connectors LC optical connectors RJ-45 Jack Ø5.5 x 9.5mm x Ø2.
4. PACKAGE CONTENTS Before starting installation, please check the package contents: • • • • 1x 1x 1x 1x DVI-7320-Tx Transmitter Unit DVI-7320-Rx Receiver Unit DVI-7320-PS External AC Power Adapter (5VDC, 2A) User Guide 5. INSTALLATION AND OPERATION This product consists of the DVI-7320-Tx Transmitter Unit and the DVI-7320-Rx Receiver Unit. The DVI-7320-Tx must be connected to the DVI output port of the signal source (such as a PC).
Info: If present, the 8th fiber optic cable does not need to be connected as all signals are transmitted over cables 1-7. The 8th fiber optic port (to the left of port T7 or R7) is unmarked and is a dummy port.
Power Connections The DVI-7320-Tx unit can be powered by the DVI soruce only if the soruce device can provide sufficient drive current on Pin 14 of the DVI output connector. If this is not the case, an additional External Power Adapter (p.n. DVI-7320-PS) may be required to power the DVI-7320-Tx unit. The DVI-7320-Rx unit cannot draw power from the connected display, but it can receive power from the DVI-7320-Tx unit, provided a copper CAT5 cable is used to link the DDC ports.
7. LIMITED WARRANTY LIMITED WARRANTY – With the exceptions noted in the next paragraph, DVIGear, Inc. warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of three (3) years from the date of purchase. Should this product, in DVIGear’s opinion, prove defective within this warranty period, DVIGear, at its option, will repair or replace this product without charge.
Your Digital Connectivity Experts Toll Free 888.463.9927 Phone 770.421.6699 Toll Free 888.463.9927 Fax 770.234.4207 Phone 919.969.6681 Fax 919.869.1310 DVI-7320-UG-02 / May.2011 DVIGear, Inc. 1059 Triad Court, Suite 8 400 Meadowmont Village Circle Marietta, Georgia 30062-2258 Suite 425 Chapel Hill, NC 27517 www.dvigear.com www.dvigear.
