Owner manual

-11-
5.3.2 Menu Structure
The OSD menu structure is as shown below. Items in bold and with an
asterisk (*) are the factory default settings. Items in bold and in brackets [ ]
are the default values for those settings.
High Level Secondary Level Adjustment
DISPLAY
OUTPUT
640×480 60 / 800×600 60 / 1024×768 60 / 1280×768 60 /
1360×768 60 / 1280×720 60 / 1280×800 60 / 1280×1024 60 /
1440×900 60 / 1400×1050 60 / 1680×1050 60 / 1600×1200 60 /
1920×1080 60 / 1920×1200 60 / 720×480P 60 / 1280×720P 60*
/ 1920×1080I 60 / 1920×1080P 60 / 720×576P 50 /
1280×720P 50 / 1920×1080I 50 / 1920×1080P 50
SIZE
(aspect ratio)
OVER SCAN
FULL
FOLLOW INPUT*
PAN SCAN
LETTER BOX
UNDER 2
UNDER 1
MODE INFO OFF, INFO*, ON
INPUT HDCP (HDMI mode only) OFF, ON*
PC (PC mode only)
(1)
AUTO SETUP
H_POSITION
V_POSITION
PHASE
CLOCK
WXGA / XGA*
RESET
COLOR
CONTRAST
0~60 [30]
BRIGHTNESS 0~60 [30]
COLOR
R,G,B 0~1023 [512]
R,G,B OFFSET 0~1023 [512]
HUE 0~60 [30]
SATURATION 0~60 [30]
SHARPNESS 0~30 [3]
NR.
OFF*, LOW, MIDDLE, HIGH
AUDIO
VOLUME
0~100 [100]
DELAY OFF*, 40ms, 110ms, 150ms
SOUND ON*, MUTE
SOURCE (HDMI mode only)
AUTO*, EXT.
SETUP
FACTORY RESET
KEY LOCK OFF*, ON
POWER SAVE OFF*, ON
IP MODE DHCP*, STATIC
SET STATIC IP
IP ADDRESS: 0.0.0.0.~255.255.255.255 [192.168.0.1]
SUBNET MASK: 0.0.0.0.~255.255.255.255 [255.255.255.0]
DEF. GATEWAY: 0.0.0.0.~255.255.255.255 [192.168.0.254]
FREERUN COLOR
BLACK, BLUE*
INFORMATION
INPUT
OUTPUT
REVISION
IP ADDRESS
Note 1: The PC menu is only active when the PC Input is selected as the source.