Instruction Manual

-10-
Navigate to the specic parameter you wish to adjust and then press the ENTER
push button to make the selection. Use the Decrease (-) and Increase (+) push
buttons to select a different value for the parameter (e.g., change output resolution
or change brightness). Use the Exit selection to leave the OSD Menu.
High Level
Secondary
Level
Adjustment
VIDEO
Picture Mode User / Standard / Vivid / Movie
Contrast 0-100 Relative Contrast Adjustment
Brightness 0-100 Relative Brightness Adjustment
Hue 0-100 Relative Hue Adjustment
Saturation 0-100 Relative Color Level Adjustment
Sharpness 0-100 Relative Picture Sharpness Adjustment
Scale Overscan / Underscan / Letterbox / Panscan / Full
Noise Reduction Low / Middle / High / Off
Exit Return to High Level Menu
COLOR
Color Tone User / Normal / Warm / Cool
Red 0-100 Relative Red Color Level
Green 0-100 Relative Green Color Level
Blue 0-100 Relative Blue Color Level
Exit Return to High Level Menu
OUTPUT
(1)
VGA, SVGA , XGA, SXGA, UXGA, SXGA+, 480I, 480P,
720P60, 1080I60, 1080P60, 576I, 576P, 720P50,
1080I50, 1080P50, NATIVE, WXGA, WSXGA, WUXGA,
WXGA+
Exit Return to High Level Menu
OSD CONTROL
(2)
H Position 0-100 Relative L-R Position
V Position 0-100 Relative U-D Position
Timer 0-100 Relative OSD Show Time (Sec)
Transparency 0-100 Relative OSD Text Transparency
Exit Return to High Level Menu
AUDIO
(3)
Source HDMI / L-R / Coaxial
Delay OFF / 40 ms / 110 ms / 150 ms
Sound ON / Mute
Exit Return to High Level Menu
INFORMATION
(4)
Source (Input Interface)
Input (Input Resolution)
Output (Output Resolution)
Version (Firmware Version)
Exit
Close the OSD Menu