Instruction Manual

-8-

that power has been applied to the unit. Press the Power button to turn the

unit OFF / ON again as needed. In the event of a power outage, this unit will

automatically power ON and restore the last used settings as soon as power is

reapplied to the unit.

Note: Proper operation of this product depends on the use of the high quality cables.

DVIGear’s Super High Resolution (SHR™) cables provide low loss, low jitter, high bandwidth

signal handling and are recommended for use with this product.

5.0 OPERATING THE UNIT

The DVI-3551a Convert/Scaler can be operated from either the front panel

controls, or via the included Infrared Remote Control unit.

Since Infrared is the control method used by the majority of users, please take

the time to familiarize yourself with the location and function of the various

control buttons on the Controller.

Note: Please use the OSD menu for resolutions not directly accessible from the IR remote.

Toggle through

the Inputs

Select PC Input

Select HDMI Input

Select OSD Menu

Navigate Menus

and Adjustments

Select Auto-Adjust

Function

Select YPbPr

Input

Select Output

Resolution

Exit Menu

Reset to Factory

Default Settings

Power On/Off

INPUT POWER

HDMI/DVIHD PC

VGA SVGA XGA

SXGA UXGA 1080i

1080p720p480p

EXIT MENU

RESET

AUTO

ADJUST

CR-27*A