User manual

49
7.1.2 Channel switching
Press CH +/- or ▲ ▼ button to change the TV channels.
You can also enter the channel number by using the numeric keypad on the
remote and the channel will change after a few seconds.
7.2 DTV Recording
7.2.1 Instant recording
This function records the current displayed channel.
• Select the desired channel to record while watching and then press the REC button to record.
You cannot change the channel while recording.
• Press the STOP(■) to stop recording, or, when the recording duration is reached, the TViX will stop
recording.
• The recorded file is stored to the hard disk of the TViX in a folder named DTV_REC
The file is saved with a name of the form “YY-MM-DD day station named AM/PM HH:MM.tp”
The hard disk must be used under the NTFS file system. If the FAT32 file system is used, an error message
appears.
• Each press of the REC button changes the recording duration in the sequence shown below.
Free Space->30min->45min->60->75->90->105->120->150->180->210->240. When recording, you can see
red-round OSD on the left-top of the screen.
You can also add recording time by pressing the REC button during Instant Record.
※ Checking Digital signal Reception
① Press the INFO button on the remote control.
② The Signal strength meter will appear on the left-bottom.
③ If signal strength meter indicates less than 14.9db, adjust your antenna to increase the signal
strength. Continue to adjust the antenna until you find the best position with the strongest signal.