User manual

47
6.3.4 Using File Copy/Move
TViX supports File Copy function without PC. You can now copy from external USB hard drives or internal
hard disk to internal hard disk. (Currently, move function is not supported)
TViX internal HDD <-–> internal HDD,
TViX internal HDD <-–> Network DISK With Netshare.
TViX internal HDD <-–> USB Host DISK (except ODD device.)
1. In the folder that has source files, press Function key and select Copy/Eject Icon then you will see
Source on the right top of the screen. (Currently, not support folder copy)
2. Select files using Ok button. (If you press 0(zero), the selection will be inverted)
If file is selected, you will see red checked icon on the file list.
3. After selection files, press Function key again and then the OSD will changed to Target from Source
To cancel copying, press Function key again and then press cancel icon.
4. In case of target mode, you can use arrow key, so you can change the target folder.
5. Navigate to the folder where you want to copy, and press Function key again then select Copy icon.
6. You will see progress OSD after pressing copy/Cancel icon.