Installation Guide

ManualsBrandsDVI ManualsPendant LightingDVP7521ORB

WARNING: RISK OF FIRE AND ELECTRIC SHOCK. THIS

PRODUCT IS TO BE INSTALLED BY A QUALIFIED

ELECTRICIAN ONLY. WIRE IN ACCORDANCE WITH

NATIONAL AND LOCAL ELECTRICAL CODES.

wire with small rib

LIGHTING INC

120 Great Gulf Drive, Concord,

Ontario, Canada, L4K 5W1

Tel: (905) 660 5600

Fax: (905) 660 5700

Thank you for purchasing a DVI Lighting Product, we

hope that it's timeless style and grace will create an

enjoyable environment for you in the years to come.

Here are a few things to note before you install your light.

1.Please save these instructions for the future.

2.To install this fixture you will need a Phillips head

screwdriver

3.After you unpack your fixture, ensure that you have

all of the parts necessary for the successful installation

of this product. If something seems to be missing, first

look through all of the packing material. We suggest

that you keep all of the packaging until the light is

properly installed.

after you install your light

1.Make sure to note the maximum recommended

wattage for your light fixture - DO NOT EXCEED THE

RECOMMENDED WATTAGE. The sockets on these

fixtures are rated to 150 Watts medium base bulbs.

2.To clean your Fixture, we recommend that you use a

mild detergent, such as dish washing soap, and warm

water to clean the glass and metal surfaces. Use a damp

soft cloth to wipe off dust.

DO NOT USE abrasive pads or cleaning materials.

Page 1

Electrical Assembly Instructions

1. Attach the back plate (universal crossbar) to the electrical box.

2. Using the supplied wire connectors, connect the wires:

A: Copper ground wire to Ground Wire - If you only have two wires

coming from the electrical box, connect the fixture's copper wire to

the Green ground screw on the crossbar or ground screw in the electrical box.

3. Note that one of the cord wires has small rib running alongside the wire.

The wire with the rib is neutral wire.

B: Ribbed wire from fixture to White (neutral) Supply Wire.

C: Smooth wire from fixture to Black (hot) Supply Wire.

canopy

SCHOOLHOUSE

DVP7521, 7551 pendant

ground screw

ground wire

back plate (universal crossbar)

WWW.DVCANADA.COM

Summary of content (2 pages)

PAGE 1
SCHOOLHOUSE Thank you for purchasing a DVI Lighting Product, we hope that it's timeless style and grace will create an enjoyable environment for you in the years to come. DVP7521, 7551 pendant Here are a few things to note before you install your light. 1.Please save these instructions for the future. 2.To install this fixture you will need a Phillips head screwdriver 3.After you unpack your fixture, ensure that you have all of the parts necessary for the successful installation of this product.
PAGE 2
SCHOOLHOUSE DVP7521, 7551, pendant Assembly Instructions: 1. Determine the the intended height of the fixture and use the appropriate sizes of extension pipes. Attach pipes to the glass holder and on the other end to the ceiling canopy swivel. 2. Attach the universal crossbar of the fixture to the electrical box. 3. Place the fixture ceiling canopy over the screws, and attach the finials to hold the fixture in place. 4. Insert the bulb, use medium base bulb Max.150Watts 5.