User`s guide

DVDO Matrix
6
6x2 4K Ultra HD HDMI Matrix Switcher
DVDO Matrix
6
17 A.04
The Information screen displays critical switch settings as well as audio and
video information about the current active input.
CEC Enable: If checked, Matrix
6
will respond to CEC commands i.e. power
on/off. If unchecked, CEC commands will be ignored. *On
Load FW from USB: Loads new firmware from an inserted USB flash
drive. Note: user needs to confirm this operation by pressing ENTER
again,. See Updating Firmware for more information.
Factory Settings: Resets Matrix
6
to factory default settings. Note: the user
needs to confirm this operation by pressing ENTER again. Power cycle
Matrix
6
after 30 seconds.