Product manual

Section3: Operating DVDO EDGE GREEN with Remote and Menus
70
Settings: Advanced Safe Mode Options
Safe Mode temporarily suspends features that can cause loss of picture. The features that are suspended include 1:1 Frame Rate,
Deep Color, and Output Format selection. Safe Mode is entered and exited by pressing the SAFE button on the EDGE GREEN
remote.
The Safe Mode Output Format selection by default is set to Auto when Safe Mode is entered. This option enables the user to select
the output format used for Safe Mode. In addition to Auto, users can select 480p, 576p, or VGA.
To change the default format for Safe Mode, first put EDGE GREEN into standby (power down button), then use one of the following
button sequences:
 For Auto: press Enter 6100 Enter
 For 480p: press Enter 6103 Enter
 For 576p: press Enter 6104 Enter
 For VGA: press Enter 6114 Enter
SAFE button on remote activates
Safe Mode. Press this button if
you can’t see a picture to change
display format and turn off certain
features.