Product manual

Section3: Operating DVDO EDGE GREEN with Remote and Menus
69
Component Input (cont’d)
The Component Inputs window gives you 3 options for controlling Automatic Gain Control on Analog Inputs:
Single Sync: This is the default setting. Most component inputs will have sync on the Y signal and should use Single Sync.
Triple Sync: A few devices will add sync to all three component input signals (Y, Pb, Pr). In you know your device does this, choose
Triple Sync.
AGC Disable: This choice disables Automatic Gain Control. In some cases, AGC will cause brightness levels to be incorrect due to
distortions in the analog input signals. Disabling AGC may correct this problem.
You probably don’t know if a device that generates an analog component signal puts sync on Y, or on all three inputs, or if it distorts
the incoming signal. In general, you should use Single Sync. If your picture does not look correct, experiment with the other settings.