Product manual

Section 2: Set Up DVDO EDGE GREEN
20
Section 2: Setup
Section 2: Detailed Set Up Instructions for DVDO EDGE GREEN
Summary
A summary of the setup procedure appears on this page, followed by a more detailed description over the following pages. Some
steps may be skipped depending on your system configuration and your preferences.
1. Gather your cables. For help choosing cables, see “Cables” in the Appendix.
2. Connect your AV Receiver (you can skip this if you will use your TV’s built-in audio).
o Connect a cable from your DVDO EDGE GREEN to your AV Receiver
If your AV Receiver has HDMI input, connect an HDMI to HDMI cable from EDGE GREEN’s Audio HDMI output to
your Receiver’s HDMI input.
If your AV Receiver does not have HDMI, connect a cable from EDGE GREEN’s Optical Audio output to your
Receiver’s optical input.
o Power up your AV Receiver
o Set up your AV Receiver to accept input from EDGE GREEN
3. Connect and set up your TV
o Connect a cable from your DVDO EDGE GREEN to your TV
If your TV has an HDMI input, use and HDMI to HDMI cable.
If your TV has a DVI input, use an HDMI to DVI adapter cable.
o Power up your DVDO EDGE GREEN and your TV
o EDGE GREEN’s Display Wizard will lead you through the remaining setup.
4. Connect and set up your input components
o Connect a cable from your source component’s audio/video outputs to your EDGE GREEN
o Power up the source component
o Input Wizard should appear to guide you through setup.
o Test to see that you have both audio and video from the source component
o Repeat the steps above for each of your source components