DVDO EDGE High Definition Video Processor & Hub Setup Guide Version 1.
This Setup Guide presents setup and configuration guidance for DVDO EDGE in summary form. For more complete information please refer to the DVDO EDGE Product Manual included on the CD. Customer Support Information email: edgesupport@dvdo.com phone: 1-877-382-EDGE (1-877-382-3343) web site: www.dvdo.com/edge Check the web site for news and updates for your DVDO EDGE To learn about VRS Video Processing Technology, visit http://www.anchorbaytech.
System Configuration: Most people will use one of the two configurations shown on this page and the next. Digital Display Using Built-in Audio For this configuration to work, your display should have HDMI input and built-in audio. Connect your source components (DVD Player, Set Top Box, Game console, etc.) to EDGE’s inputs. Connect EDGE’s Video/Audio HDMI output to your display. The DVDO universal remote can control EDGE and up to 7 other components in your system.
Digital Display with a Separate AV Receiver This configuration features a separate AV Receiver for audio processing. Your Display must have either an HDMI or DVI input. If the Display has DVI input, you will need an HDMI to DVI adapter cable. Your AV Receiver can be connected using HDMI or Optical cables. Details of the Display and AV Recveiver connections are shown on the next page.
EDGE Output Connections 1. If you don’t have an AV Receiver, skip to # 2. DVDO Edge -- Rear View of output Connectors If your AV receiver has HDMI input, connect an HDMI cable from Edge’s Audio Only HDMI output to an HDMI input on your AV receiver. If your AV Receiver does not have HDMI, connect an Optical cable from the Optical Audio Out to an optical input on your AV Receiver. Use your AV Receiver’s remote to power on the AV Receiver and set its input to Edge. Connect your TV to the Video/Audio output.
Display Wizard: Step 1, Configure Your Outputs EDGE automatically chooses a Display Name, Video Output Format, and Audio Output Connector. Use the Display Wizard to make any changes you would like, OR accept the automatic settings, and EXIT the Wizard (Left Arrow). You should see the Display Wizard on your TV as shown left. The Display Wizard assists setup of your TV and your audio. Using Display Wizard, you can 1. Name your Display. 2. Select an output video format. 3. Select an output connector for audio.
Display Wizard: Step 2, Video Output Format EDGE automatically chooses a Video Output Format by polling your display for its preferred format. Or, you may use the Display Wizard to change your Video Output Format as shown on this page. 2a. Select an output video format. EDGE defaults to “Auto Select” and communicates with your TV to find the TV’s preferred format. If you want to change the output format, press Right Arrow to go to the Output Format screen, shown below.
Display Wizard: Step 3, Audio Output Connector EDGE automatically chooses an Audio Output Connector. Or, you may choose an Audio Output Connector manually using the Display Wizard, as shown on this page. 3a. Select an audio output connector. You have 4 choices for audio output: A. Auto: Default setting. Automatically chooses an output depending on the capabilities of the attached, powered-on components. B. Video HDMI: Outputs audio on the Video HDMI connector.
Input Wizard -- Configure Your Inputs: Step 1, Naming an Input Input Wizard guides you through Naming an Input, Setting Input Priority (for automatic input switching), and Associating an Audio Input with a Video Input. Input Wizard guides you through the setup of your input components. You can run the Input Wizard for every input component. Using the Input Wizard, you may 1. Rename an input component. 2. Set an Input Priority for the component. 3. Associate an Audio Input with the video input. 1a.
Input Wizard: Step 2, Set Input Priority Input Priority is used to select inputs if EDGE is set for Auto Input Select, which is the default. If one or more inputs has active signal, EDGE will choose the active signal with the highest priority. You may use the Input Wizard to change priority as shown on this page. 2a. Set Input Priority Input Priority is used to automatically select inputs when EDGE is in Auto Input Select mode, which is the default.
Input Wizard: Step 3, Associate an Audio Input Associate Audio is used to create an audio/video pair of inputs (for non-HDMI inputs). The pair will switch together when you switch input components. 3a. Associate Audio “Associate Audio” is used to create an audio/video pair of inputs that are switched as a unit. If your source component does not have HDMI output, then you have set upEDGE so that it treats a video input and an audio input as a pair for switching.
DVDO Universal Remote Using the Remote to Control Edge Power On Power Off The remote control that comes with your DVDO Edge is a universal type. It can control your edge plus 7 other components in your system. The remote must be in DVDO mode to control Edge. Then the buttons shown on the right will work as described. The Picture Shape buttons on the bottom of the remote will work anytime, independent of the remote’s current mode.
DVDO Universal Remote: Programming the remote using the Preprogrammed Code Method The Preprogrammed Code Method using 3 digit codes is a simple way to program the DVDO Universal Remote. Other methods are described fully in the DVDO EDGE Product Manual on the CD. Programming the remote using the preprogrammed 3 digit code method. Step 1] Turn on the device you want to operate manually. Step 2] Press the Device button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on.
Code Tables: TV.
Code Tables: TV.
Code Tables: TV.
Code Tables: TV.
Code Tables: TV.
Code Tables: AV Receivers and audio processors.
Code Tables: AV Receivers and audio processors.
Code Tables: AV Receivers and audio processors. Manufacturer/Brand YAMAHA ZENITH Set-Up Code Number 026 253 169 067 173 205 264 232 089 264 274 285 373 143 210 Code Tables: Cable Boxes.
Code Tables: Satellite Boxes.
Code Tables: DVD.
Code Tables: DVD.
Code Tables: Video Cassette Recorders (VCR).
Code Tables: Video Cassette Recorders (VCR).
Code Tables: Video Cassette Recorders (VCR). Manufacturer/Brand VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Set-Up Code Number 048 012 034 046 040 003 013 017 024 145 034 040 053 054 131 012 034 039 043 072 056 048 101 034 058 Code Tables: VCR-TV/VCR Combos.
