User's Manual

Title:
DV601 User Manual
Department
Engineering
Revision:
DRAFT
Page:
7
Authored by:
Mathew Locoteta
Document Owner:
Mathew Locoteta
Approved by:
**PENDING*
Effective Date:
11/23/2020
Doc ID:
UM-0030-DO
Printed by Mathew Locoteta on January 20, 2021 at 4:31 PM. This document is marked CONFIDENTIAL and PROPRIETARY. Copyright © 2020
5 Before Installation
Before installation of DV601 ensure the following is complete:
1. A micro-SD card is formatted to FAT32 and inserted in the micro SD Slot.
2. If necessary, contact Rosco Engineering to supply a valid device configuration for your device.
3. If using on-device 4G, make sure an activated SIM card is inserted in the SIM slot.
4. Ensure your harness matches your vehicle requirements (OBD-II, J1939, Breakout).