User's Manual

Title:
DV601 User Manual
Department
Engineering
Revision:
DRAFT
Page:
10
Authored by:
Mathew Locoteta
Document Owner:
Mathew Locoteta
Approved by:
**PENDING*
Effective Date:
11/23/2020
Doc ID:
UM-0030-DO
Printed by Mathew Locoteta on January 20, 2021 at 4:31 PM. This document is marked CONFIDENTIAL and PROPRIETARY. Copyright © 2020
7 Breakout Harness Connection Guide
For out of vehicle connection or known use direct connection it is recommended to use the breakout
harness (DV667).
The following table illustrates what each wire’s description and intended connection.
#
Color
Connection
Type
Function
1
Black
Ground
Power
Connect to battery ground.
2
Red
+Battery
Power
Connect to battery positive (10 VDC — 36VDC)
3
Blue
+Battery
Power
Connect to battery positive (10 VDC — 36VDC)
4
Yellow
Ignition
IO
Connect to battery ignition. Turns device on and is a switch between
parking mode and drive mode.
5
White
CAN-L
IO
Connect to CAN low. Supplies vehicle CAN information.
6
Green
CAN-H
IO
Connect to CAN high. Supplies vehicle CAN information.
7
Orange
Turn-L
IO
Connect to left turn signal.
8
Pink
Turn-R
IO
Connect to right turn signal.