Specifications

Installer’s Guide – (Gas Post-Boost) Solar Water Heater
10
H4110 4110 Rev. F
Installer’s Guide
For Tiled Roofs Only
• Carefully remove a roof tile and
locate the nearest roof truss.
• Attach the rst (2 per mounting rail)
stainless steel collector strap to the
mounting rail.
• Shape the collector strap over the tile
and position over the roof truss.
Note: A minimum of 3 roong
screws of 40mm length must
be used to x the collector
strap to the truss.
• Ensure collector strap is located on
truss vertically.
• Repeat this process for the collector
strap at the other end of the
mounting rail.

• Once the bottom rail has been
secured, the collector can now be
lifted on to the roof.
Note: Ensure this is done with
full consideration to OH&S
regulations. Care should be
taken.
Collector Strap
Collector Strap
Use minimum
of 3 screws