Specifications

Part No: H3023 5 of 22
Version: 10155A
NOTE: All models are equipped with a sacrificial anode, accessible
through the top cover. Allow 50% of the height of the water heater for
clearance above to replace the anode.
The water heater has a plastic base which is resistant to water damage but it
is recommended that a concrete plinth be installed under the water heater to
protect the heater when subjected to wet conditions. A properly drained
overflow tray must be used where property damage could occur from water
spillage. (See AS/NZS3500.4.2 for further details.)
NOTE: The warranty does not cover consequential damage due to
leakage of the water heater.
PREFERRED LOCATION
If possible the location selected for the
heat pump should be on the warm side of
the home.
The selected location must have free
ambient air flow to prevent cooler
discharged air being drawn back into the
heat pump.
Allow sufficient clear space so as not to
impede this air flow. Allow 700 mm
clearance above the Airoheat and allow
150mm clearance to either side of the
Airoheat as a general rule.