User manual

16
I
NTER
A
CT
3
.
17
INTER
A
C
T
3
.
Press the “EXCL.” button on the remote control for 2 seconds
(the LED blinks green) and then press the “FUNCTION” button
thrice within a span of 1.5 seconds.
The successful reset operation is signaled by a green light
(3 seconds), whereas a failure by red light (3 seconds).
KINDLY NOTE: The description for activation or deactivation of
the child protection function is described in the user manual of
the remote control/wireless wall-switch!
5.5 RESET:
Sometimes it might be necessary to reset the wireless adaptor
plug to the factory settings and delete all the programming steps
or associations. For resetting, a controller (remote control or
wireless wall-switch) is needed.
NOTE: A successful reset of the wireless adaptor plug means
that it has once again assumed the factory settings.
...then...
“EXCL.”
... press “UP” or
“DOWN” thrice