INTERACT3. User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English 53916.00.001.01 Wireless adaptor plug switch IP 20 (Model ZW ZS 3500) 53917.00.001.01 Wireless adaptor plug switch IP 44 (Model ZW ZSA 3500) 53918.00.001.
INTERACT3. INTERACT3. Dear INTERACT3 user: Index of contents/overview of chapters You can download this user manual in an appropriately larger format from our internet website www.popp.eu. 1. 2. 2.1 3. 4. 5. 5.1 5.2 5.3 5.4 5.5 5.6 Our service hotline is available for further product-relevant questions at the service line: +49 (0) 92 73/73-150. 6. 7. 2 General information on “Z-Wave” .........................................6 General information ......................................................
INTERACT3. 1. GENERAL INFORMATION ON “Z-WAVE”: INTERACT³ is a radio system that is based on Z-WAVE technology. INTERACT³ off ers a varied range of advantages in comparison to other radio systems: Safe: Generally, radio systems build a direct link between the transmitter and the receiver. The radio signal is attenuated by every obstacle along its path (in the household e.g. wall, furniture etc.), in the worst case the radio system ceases to function.
INTERACT3. 6 INTERACT3. Established: Although the Z-Wave technology is new, it has already developed to form a technical standard. Renowned manufacturers from various fields offer solutions and applications that are based on Z-Wave technology and compatible among one another. This makes the system fit for the future and promises further upgrade phases. Further information can be found on www.z-wave. com. 2. GENERAL INORMATION: Dynamic: INTERACT³ is equipped with a dynamic network structure.
INTERACT3. 3. BEFORE INSTALLATION/STARTUP: Please carefully read the enclosed user manual before installation in order to ensure an error-free functioning. ATTENTION: Works with 230 voltage networks may be done only by authorized technicians under consideration of the country-specific installation guidelines/ norms. Prior to the assembly of the product, the voltage network has to be switched on and ensured against re-switching. INTERACT3.
INTERACT3. INTERACT3. 4. GENERAL INFORMATION ON WIRELESS PLUG ADAPTORS: • Wireless adaptor plug switch IP 20 (761 293) (Model ZW ZS 3500) Wireless adaptor plug switch IP 44 (761 309) (Model ZW ZSA 3500) Wireless adaptor plug dimmer (761 316) (Model ZW ZDAN 300) • Flip-open cover • Serves the purpose of switching or dimming of fi tted lights either via radio communication or directly over the “FUNCTION” button of the wireless plug adaptor.
INTERACT3. NOTE: • Insert wireless adaptor plugs only in sockets with safety contact/ ground wire. • Use of the wireless adaptor plug with devices that cannot comply with the technical standards can cause malfunctioning or damage connected equipments or wireless adaptor plugs. • Since the wireless adaptor plug deals with electronic equipment, one has to take special care in contact with moisture or cleaning agents. We recommend cleaning only with a dry cloth. 12 INTERACT3. 5. FUNCTIONS/ OPERATION: 5.
INTERACT3. NOTE: If a radio link should not be possible while network inclusion, please bring the controller close to the wireless adaptor plug. NOTE: For the purpose of adaptation, both the controller as well the wireless adaptor plug have to be supplied with power. INTERACT3. 5.3 SPECIAL FUNCTIONS OF THE WIRELESS ADAPTOR PLUG DIMMER: The wireless adaptor plug dimmer saves the most recently-set light intensity and automatically switches back to the same level of brightness at which it was switched off. 5.
INTERACT3. INTERACT3. KINDLY NOTE: The description for activation or deactivation of the child protection function is described in the user manual of the remote control/wireless wall-switch! 5.5 RESET: Sometimes it might be necessary to reset the wireless adaptor plug to the factory settings and delete all the programming steps or associations. For resetting, a controller (remote control or wireless wall-switch) is needed. ...then... ... press “UP” or “DOWN” thrice “EXCL.” Press the “EXCL.
INTERACT3. INTERACT3. 5.6 INCLUDING A WIRELESS ADAPTOR PLUG INTO A THIRD-PARTY NETWORK: 6. TECHNICAL DATA: Wireless adaptor plug switch IP 20 (Model ZW ZS 3500) controller third party manufacturer ...then... press 3 times Wireless adaptor plug switch IP 44 (Model ZW ZSA 3500) ...or... press “UP” or “DOWN” thrice Start the inclusion step on the concerned controller of its network and press the “FUNCTION” button of the equipment to be included thrice within a span of 1.5 seconds.
INTERACT3. Wireless adaptor plug dimmer (model ZW ZDAN 300) Receiving frequency: Switching capacity: 868.42 MHz HV, incandescent bulbs: 25 – 300 W LV-Halogen with iron core transformer 40 – 300 VA Operating voltage: 230 V, 50 Hz Operating temperature: 0°C to +40°C Microfuse: T 1.25 A H All the above-mentioned products (exception: ZW ZSA 3500) comply with the norms only in indoor use: RTTE 1999/05/EG, VDE 0620-1, EN 61058. 20 INTERACT3. 7.
INTERACT3. INTERACT3. 3. The guarantee term amounts to 24 months from the date of purchase by the end-user. Remark: Note for well-versed users. All-manufacturer Z-Wave-compatible programming functions: The compliance of the claim period has to be proved by a statement of the purchase date by means of enclosed invoice, delivery note or similar documents. To effect Include mode Press “INCL.
INTERACT3. Disassociate Press the “ASSOC.” button of the controller for 2 seconds, subsequently the “DOWN” button, followed by the “send Node Info Frame” of the target equipment. Learn Mode: Press “UP” or “DOWN” button thrice. Send Node Info Frame - press “UP” or “DOWN” button thrice - (Controller) press “INCL.” for two seconds Add node Press “UP” or “DOWN” button thrice (inclusion or primary controller). Please visit our website www.popp.
