Technical Specifications

Product Data Sheet
When you're painting your home, don't forget the fifth wall ... the
ceiling! With spatter-resistant technology and smooth, even
application, Dutch Boy® Platinum® Plus Ceiling Interior 100% Acrylic
Paint + Primer with Extreme-Hide Technology provides exceptional
beauty with less effort. Tintable to hundreds of beautiful colors, its
exceptional application, hide and ability to seal most common
household stains gives you a gorgeous painted surface. This
advanced No Prep, No Prime formula eliminates the need for
extensive surface preparation, helping you complete projects faster
and with fewer steps. Not only does Platinum Paint + Primer adhere
to difficult surfaces, such as smooth, glossy paint, but it also does so
without the need to sand or prime. Available in the easy-to-use
Dutch Boy Twist & Pour® container.
Platinum® Plus Ceiling Interior
100% Acrylic Enamel
Paint + Primer
Features
• Paint + Primer with Extreme-Hide Technology provides
exceptional beauty with less effort
• No Prep, No Prime feature enables Platinum® Plus coating to
be applied directly over sound, non-peeling, previously painted
glossy surfaces or uncoated drywall, plaster, masonry, and
non-bleeding wood without the need to sand or prime
• Extreme-hide technology provides excellent coverage in fewer
coats
• Excellent spatter resistance helps protect floors and walls
• Can be tinted to hundreds of pastel colors
• Specially formulated to resist mildew growth on the paint film
• Backed by an unconditional satisfaction, lifetime warranty
Where To Use
Use on properly prepared, previously painted or bare interior ceilings
of textured or smooth drywall, plaster, masonry, wood and acoustical
tile.
Recommended Systems
Application
DB654-07 – Flat
Touch: 1 hour
Recoat: 4 hours
DRY TIME (@77˚F, 50%
R.H.):
COVERAGE:
APPLICATION:
CLEAN UP:
Brush: nylon/polyester
Roller: 1/4" - 1/2" synthetic nap
Spray (Airless): 2000 psi Tip .015" - .019"
Warm soapy water
400 sq. ft./gal (smooth)
125 - 300 sq. ft./gal
(rough surface)
The No-Prep, No-Prime feature enables Platinum® Plus Ceiling
coating to be applied directly over sound, non-peeling, previously
painted glossy surfaces or uncoated drywall, plaster, masonry,
non-bleeding wood and acoustical tile without the need to sand or
prime.
Previously Painted Surfaces:
• Use Platinum® Plus Ceiling Paint + Primer to spot prime bare
areas, allow to dry, then paint entire surface.
• 1-2 coats of Platinum® Ceiling Paint + Primer
Bare Surfaces: Drywall, Plaster, Masonry, Wood and
Acoustical Tile:
• 1-2 coats of Platinum® Plus Ceiling Paint + Primer
• The first coat of Platinum® Plus Ceiling Paint + Primer serves as
a priming coat and the second coat provides final appearance
and performance.
Severely Stained/Bleeding Surfaces:
Extreme household stains, watermarks, wood knots, bleeding
woods such as cedar and redwood, or other surfaces where paint
adhesion or stain suppression is a particular problem, use an
appropriate primer.
• 1-2 coats of Platinum® Plus Ceiling Paint + Primer
Clean Up/Disposal
• Clean hands and tools with warm, soapy water.
• Promptly wipe up spills and spatters with a damp cloth.
• In event of a spill, absorb with inert material such as sand or
kitty litter.
• Dispose of empty container or unused portion in accordance
with local, state, and federal regulations.
• After cleaning, flush spray equipment with mineral spirits to
prevent rusting of the equipment. Follow manufacturer’s
safety recommendations when using mineral spirits.
Maintenance
Freshly painted surfaces may be washed after 30 days. Clean with
mild, non-abrasive, non-oily cleanser and water.
Cautions
• Protect from freezing
• For interior use only
• Apply when surface, air and product temperatures are above
50˚F. Paint dries best between 65˚F and 85˚F.
• Stir paint thoroughly. Mix gallons together when using more
than one gallon of the same product.
• Brush a 3" border around all edges.
• Fill the roller completely. Apply paint in the form of an "N". Fill
the center of the "N" with horizontal strokes from side to side.
• Lightly smooth out with vertical strokes. Repeat "N" pattern
with a freshly loaded roller, continuing to work in 2’ by 2‘
sections.
• Always roll from the dry, unpainted area into the wet edge.
• Other methods may require multiple coats for a professional-
looking finish.
For more information, please call 1-800-828-5669, or visit www.dutchboy.com
Brush: Nylon/Polyester
Roller: Synthetic, 1/4" – 1/2" Nap
Sprayer – Airless: 2000 psi, .015" – .019" Tip
PLATCEIL