SDS

Section 7. Handling and storage
Conditions for safe storage,
including any
incompatibilities
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see Section 10) and food and drink. Store locked up. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.
:
Titanium Dioxide
ACGIH TLV (United States, 3/2016).
TWA: 10 mg/m³ 8 hours.
OSHA PEL (United States, 6/2016).
TWA: 15 mg/m³ 8 hours. Form: Total dust
Cristobalite
OSHA PEL Z3 (United States, 6/2016).
TWA: 250 mppcf / 2 x (%SiO2+5) 8 hours.
Form: Respirable
TWA: 10 mg/m³ / 2 x (%SiO2+2) 8 hours.
Form: Respirable
TWA: 30 mg/m³ / 2 x (%SiO2+2) 8 hours.
Form: Total dust
OSHA PEL (United States, 6/2016).
TWA: 50 µg/m³ 8 hours. Form: Respirable
dust
ACGIH TLV (United States, 3/2016).
TWA: 0.025 mg/m³ 8 hours. Form:
Respirable fraction
NIOSH REL (United States, 10/2013).
TWA: 0.05 mg/m³ 10 hours. Form: respirable
dust
1,2-Benzisothiazolone
None.
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,
local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures
:
Control parameters
Individual protection measures
Occupational exposure limits (OSHA United States)
None.
Ingredient name
Exposure limits
Occupational exposure limits (Canada)
Environmental exposure
controls
:
Date of issue/Date of revision
:
12/19/2016
Date of previous issue
:
No previous validation
Version
:
1
5/11