Update Description
Table Of Contents
- DSM-04D(MG24) Zigbee Cloud Module Datasheet-V1.0_20221121
- 1Introduction
- 2Mechanical Requirement
- 3Electrical parameters
- 4RF features
- 4.1Basic RF feature
- 4.2RF Transmitter Characteristics
- 4.2.1RF Transmitter General Characteristics for the 2.4
- 4.2.2RF Transmitter Characteristics for 802.15.4 DSSS-O
- 4.2.3RF Transmitter Characteristics for Bluetooth Low E
- 4.2.4RF Transmitter Characteristics for Bluetooth Low E
- 4.2.5RF Transmitter Characteristics for Bluetooth Low E
- 4.2.6RF Transmitter Characteristics for Bluetooth Low E
- 4.3RF Receiver Characteristics
- 4.3.1RF Receiver General Characteristics for the 2.4 GH
- 4.3.2RF Receiver Characteristics for 802.15.4 DSSS-OQPS
- 4.3.3RF Receiver Characteristics for Bluetooth Low Ener
- 4.3.4RF Receiver Characteristics for Bluetooth Low Ener
- 4.3.5RF Receiver Characteristics for Bluetooth Low Ener
- 4.3.6RF Receiver Characteristics for Bluetooth Low Ener
- 5Antenna
- 6Production instructions
- 7Recommended oven temperature curve
- 8Storage conditions
- 9Ordering information
- 10MOQ and packing
- FCC with modular Statement
浙江东胜物联技术有限公司
Zhejiang Dusun Electron Co., Ltd.
杭州市大关路 189 号万通中心 A 幢 8 楼 Floor 8, Building A, Wantong Center
Tel: 86-571-86769027/8 8810480 Hangzhou, China
Website: www.dusuniot www.dusunremotes.com www.dusunlock.com
Note:
1.Per Bluetooth Core_5.1, Vol.6 Part A, Section 3.2.2, exceptions are allowed in up to three bands of 1 MHz width, centered
on a frequency which is an integer multiple of 1 MHz. These exceptions shall have an absolute value of -20 dBm or less
4.2.3 RF Transmitter Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 1 Mbps Data
Rate
Parameter
Test Condition
Min.
Typ.
Max.
Unit
Transmit 6 dB bandwidth
PAVDD=3.3 V, P
out
=POUT
MAX
-
-718
-
KHz
Power spectral density limit
PAVDD=3.3 V, P
out
=POUT
MAX
, Per FCC part
15.24
-
-0.5
-
dBm/3kHz
Occupied channel bandwidth
per ETSI EN300.328
P
out
=10dBm 99% BW at highestand lowest
channels in band
-
1
-
MHz
In-band spurious emissions,
with allowed exceptions1
PAVDD=3.3V, P
out
=POUT
MAX
, Inband spurs at
± 2 MHz
-
-26
-
dBm
Note:
1.Per Bluetooth Core_5.1, Vol.6 Part A, Section 3.2.2, exceptions are allowed in up to three bands of 1 MHz width, centered
on afrequency which is an integer multiple of 1 MHz. These exceptions shall have an absolute value of -20 dBm or less
4.2.4 RF Transmitter Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 2 Mbps Data
Rate
Parameter
Test Condition
Min.
Typ.
Max.
Unit
Transmit 6 dB bandwidth
PAVDD=3.3V, P
out
=POUT
MAX
-
-1307
-
KHz
Power spectral density limit
PAVDD=3.3V, P
out
=POUT
MAX
, Per FCC part
15.24
-
-1.5
-
dBm/3kHz
Occupied channel bandwidth
per ETSI EN300.328
P
out
=10dBm 99% BW at highestand lowest
channels in band
-
2.1
-
MHz
In-band spurious emissions,
with allowed exceptions1
PAVDD=3.3 V, P
out
=POUT
MAX
, Inband spurs
at ± 2 MHz
-
-33
-
dBm
Note:
1.Per Bluetooth Core_5.1, Vol.6 Part A, Section 3.2.2, exceptions are allowed in up to three bands of 1 MHz width, centered
on a frequency which is an integer multiple of 1 MHz. These exceptions shall have an absolute value of -20 dBm or less
4.2.5 RF Transmitter Characteristics for Bluetooth Low Energy in the 2.4 GHz Band 500 kbps Data
Rate
Parameter
Test Condition
Min.
Typ.
Max.
Unit
Transmit 6 dB bandwidth
PAVDD=3.3 V, P
out
=POUT
MAX
-
-717
-
KHz
Power spectral density limit
PAVDD=3.3 V, P
out
=POUT
MAX
, Per FCC part
15.24
-
-0.5
-
dBm/3kHz
Occupied channel bandwidth
per ETSI EN300.328
P
out
=10dBm 99% BW at highestand lowest
channels in band
-
1
-
MHz
In-band spurious emissions,
PAVDD=3.3 V, P
out
=POUT
MAX
, Inband spurs
-
-26
-
dBm










