Use and Care Manual

TROUBLESHOOTING GUIDE
Less Than
Optimal
Separation
• Air leak between Dustopper® and the buck-
et. Clean debris from between the bottom
of
Dustopper® and the rim of the bucket
• Poor air flow
Poor Air Flow
and/or Reduced
Suction
• Debris caught in hose. Clean hose.
• Clog in Dustopper®. Remove and clear
Dustopper®.
• Dirty filter. Clean or replace vacuum’s filter.
• Underpowered vacuum. Dustopper is
recommended for use with vacuums with
4.5 HP or more
Hoses Will Not
Stay Attached
• The Dustopper® hose is designed to fit ide-
ally with RIDGID® wet/dry vacuums having
a 2-1/2 in connection port. Flexible hose
adapters and/or the use of hose clamps
can help with adapting Dustopper® to
other
makes of wet/dry vacuums. Adding
electrical tape to the hose end (input port)
or the outlet port to increase friction may
improve hose coupling.
For Vacuuming
Drywall
Dust
• See the article on drywall available on our
website
For more Troubleshooting go to www.dustopper.com
FOR CUSTOMER SERVICE
Call Dustopper Service at 833-DUSTOPP or 833-387-8677
Monday – Friday from 8:30 a.m. to 5:00 p.m. EST
Email: [e-mail]
Follow “Dustopper” on Facebook and on Instagram @thedustopper.
For more on dust collection and setting up your shop with a
Dustopper, check out our Youtube channel and visit our website at
www.dustopper.com