User Manual

Special attendance and regular maintenance of the vacuum

and its parts are imperative for functioning and safety.

Daily — Prior to Operation

1. Clean tanks and install tank bags checking for holes in

bags (Never reuse bags).

2. Inspect that lters in the lter tank are in place, in good

condition (replace or clean if needed) and that bolts are

tight.

3. Attach equalization hoses to tanks & strap tanks to hous-

ing.

4. Leave the cyclone off and turn on the vacuum to help

remove air between tank and bag.

5. Put cyclone in place and latch, latches should pull cyclone

down ¼”.

6. Attach hose from cyclone to lter tank lid & check that

clamps are tight.

7. Check the electric connections for sediments of dirt or

foreign bodies (not shown).

8. Check all electrical cables for cuts or damage (not shown).

9. Check the casters for debris and that they are in good

working condition.

At recommended hours below:

Every 800 hours: Replace Motor Brushes

Every 1000 hours: Replace Filters

Note: In order to prevent unnecessary downtime, it is recom-

mended that you keep the following items in stock:

• 2X Filters

• 2X Motor Brush Sets (H0085)

• Tank Bags

Maintenance