Full Product Manual

5
Customer Service Helpline 1.800.568.3949 dustlesstools.com
SETUP
1. Remove entire contents of box.
2. Slide legs into slots with the legs with the
hooks in the back. Screw in screws.
3. Attach tool tray.
4. Place intermediate on barrel. Use clips to
secure in place.
5. Slide one end of the hose into the port.
Slide desired attachments on to the other
end of the hose.
WUNDERBAG INSTALLATION
1. Place the cardboard collar with the rubber
gasket securely over the intake port on the
inside of the barrel.
2. Reach inside the port and with your
ngers press cardboard tight and secure
around port.
DRY PICKUP
1.
Barrel should be emptied of any wet
waste. Filters can remain in place.
2. Connect hose and desired attachment.
3. As suction is reduced stop to clean or
replace lters. (Refer to Clean Filters or
Filter Installation)
4. After use or when barrel is full turn off
vacuum and disconnect from outlet.
5. Remove intermediate from barrel.
6. Empty barrel and/or remove WunderBag.
Note: To avoid back strain, do not lift a
full barrel/bag.
WET PICKUP
1.
Vacuum should be emptied of any dry
waste. Filters can remain in place. Note:
Should lters become wet, dry both lters
thoroughly before continued use.
2. Connect hose and desired attachment.
3. After use or when barrel is full turn off
USAGE