User Manual

9
Customer Service Helpline 1.800.568.3949 dustlesstools.com
MAINTENANCE
1. Place the inner lter (small white lter) over
the lter support cage and attach with the
7” hose clamp. Tighten the clamp with a
screw driver.
2. Place the shaker basket rod in the brass hole.
The basket should rest on top of the lter.
3. Place the outer lter over the shaker basket
and around the raised lip on the lid (lip is 1”
from edge of the lid) attach with the 10” hose
clamp. Tighten the clamp with a screw driver.
FILTER INSTALLATION (REGULAR WET+DRY)
1. Place the HEPA lter over the crosspiece stud
and slide on the washer. Screw on the wing
nut to compress the washer and lter seal.
2. Place the HEPA lter cover support on the
HEPA lter.
3. Place the weighted lter cleaning plate on
HEPA lter support.
FILTER INSTALLATION (HEPA WET+DRY)
NOTE: DO NOT REMOVE FILTER CLEANING
WEIGHT FROM BAG.