User Manual

10
Customer Service Helpline 1.800.568.3949 dustlesstools.com
4. Place the lter-cleaning weight on the lter
cover support, then place the HEPA lter
cover over the HEPA lter cover support
and HEPA lter. Place the 10” hose clamp
over the HEPA lter cover so it rests on the
metal ring of the lter. Tighten the clamp
with a screw drive.
RECOMMENDED REPLACEMENT
INTERVALS
Every 6 months: Replace HEPA Filters
As needed: Replace WunderBag
Note: In order to prevent unnecessary
downtime, it is recommended that you keep
the following items in stock:
• 1X HEPA Filters
• 2X WunderBags
• Motor Brushes
MAINTENANCE cont
FILTER INSTALLATION (HEPA
WET+DRY ) cont.
• Adjustments, servicing, and inspection
work and inspection intervals specied in
these Operating Instructions, as well as any
information on the replacement of parts and
systems of the vacuum must be undertaken
and complied with.
• These activities can only be undertaken by
qualied personnel.
• Make sure that electrical components used
for replacement comply with the original
parts and are correctly adjusted if necessary.
• Before performing any maintenance, place
the vacuum in the safety off position which
is the position of the vacuum when it cannot
generate any hazard. To do this, switch off
the dust collector, pull out plug, and secure
the vacuum against unintended start up.
• Inspection intervals and times for recurring
checks specied in these Operating
Instructions must be complied with.
SERVICE
NOTE: DO NOT REMOVE FILTER CLEANING
WEIGHT FROM BAG.