Programming instructions

3
FOR SAFETY:
1. Do not operate machine:
• In ammable or explosive areas
• Unless trained and authorized..
• Unless operation manual is read and understood.
• .If not in proper operating condition
• Without hopper and/or lters in place
2. Before starting machine:.
• Make sure all safety devices are in place and operate properly.
3. When using machine:
• Do not pick up burning or smoking debris, such as cigarettes, matches or hot ashes.
• Do not operate in standing water
• Report machine damage or faulty operation immediately.
• Go slow on inclines and slippery surfaces.
• Do not leave unattended or on an unlevel surface.
• Do not pick up cables, strings, wires or other similar material.
• Make sure area is illuminated.
• Never allow children to play on or around.
• Do not transport riders or objects.
• Wear a dust mask, protective glasses and gloves in dusty environments.
4. Before leaving or servicing machine:
• Stop on level surface.
• Turn o machine.
5. When servicing machine
• Avoid moving parts. Do not wear loose jackets, shirts, or sleeves.
• Disconnect battery connection and charger plug before working on machine.
• Use manufacturer supplied or approved replacement parts.
• All repairs must be performed by a qualied service person.
• Do not modify the machine from its original design.
7. This product is classied as RAEE type special waste and is covered by the requisites of the new
environmental protection regulations (2002/96/CE RAEE). It must be disposed of separately from ordinary
waste in compliance with current legislation and standards.
Special waste. Do not dispose of with ordinary waste