Programming instructions

9
11. Waste Hopper Emptying and Cleaning
Before proceeding in removing the hopper assure that the machine is turned o.
ATTENTION: WASTE DISPOSAL MUST BE DONE BY FOLLOWING THE LAWS IN FORCE.
To clean the waste hopper proceed as follows:
• Release the hopper clamp by lifting and then pushing on the back of the clamp.
• Pull out the hopper by its handle
• Empty the hopper
To put back the hopper proceed as follows:
• Slide the hopper back into place
• Lower and press the hopper clamp to lock into place.
NOTE: It is recommended to clean the pre-lter daily. See cleaning and servicing the lter-page 7+++
12. Machine Maintenance
All service performed should be completed by persons who understand the machine or an AUTHORIZED
SERVICE CENTER. It is recommended that only authorized repair parts be used for service.
FOR SAFETY: When servicing the machine disconnect the battery connection and battery charger plug
before working on the machine
MAINTENANCE CHECK LIST
On
delivery
Daily
Every
10
hours
Every
20
hours
Every
50
hours
Every
100
hours
The belts for slackening
x
The tightness of nuts and screws x
The brushes for wear
x
The gaskets for wear and leakages x
If all the functions are in working order x x x x x x
Empty hopper x
Remove and shake pre-lter x
Check main lter x