Installation Guide

DUST SHIELD PRO
™
EXTENDABLE POLES
SPEC SHEET
PRODUCT
INFORMATION
Dust Shield PRO
™
is the innovative system that makes
constructing temporary walls to control dust and heat
loss, quick, simple and affordable. The locking head
ensures that screening will not slip; and the dent resistant
poles, with patented micro-adjust handles, are designed
to stand up to the toughest conditions. Once done, the
Dust Shield PRO
™
pole compacts for easy storage. They
are available in 10, 12 and 20 ft.
PRODUCT SPECIFICATIONS
Thickness n.a.
Bulk Material Aluminum
Head/Foot Material Plastic/Rubber
Tensile Strength n.a.
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Elongation n.a.
Chemical Name n.a.
Chemical Family n.a.
Chemical Formula Proprietary
Trade Name Dust Shield PRO Poles
Material Use Surface Protection/Dust Containment
AVAILABLE SIZES
DSPRO10 Silver Poles adjust up to 10ft 6 lbs.
DSPRO2 Red Poles adjust up to 12ft 8 lbs.
DSPRO20 Red Poles adjust up to 20ft 12 lbs.
INSTRUCTIONS
Remove items from box. Attach the foot and head to the bottom and top
of poles. Attach plastic sheeting into the head portion of the pole. Slide
the lever forward to lock the plastic sheeting in place. Twist and raise the
pole while moving it into position. Tuck plastic sheeting under the foot of
the pole. Twist the pole counter clockwise to tighten.
HANDLING AND STORAGE
Store at room temperature, protect as needed.
SAFETY
SDS for Surface Shields products available by request.
FEATURES
• Makes constructing temporary walls quick and affordable
• Heavy gauge aluminum prevents dents
• Locking head ensures that poly sheeting will not slip out
• Adjustable poles are available in 10, 12 and 20ft.
• 360 degree swivel foot for use on flat and angles ceilings
• Custom printed bags available
• Micro adjust feature increases tension against the ceiling
APPLICATIONS
• Construction • Drywall
• Remodeling • Painting
• Dust Containment • Temporary Protection
The information in this document was obtained from sources which
we believe reliable. The information is provided without any warranty
expressed or implied regarding its correctness. We do not assume
responsibility for loss, damage or expense in any way connected with
the handling, storage, use or disposal of the product.
© 2017 Surface Shields, Inc. All rights reserved. Product names &
attributes trademark of Surface Shields, Inc. where applicable.
Reusable Heavy Duty
7102.70