User's Manual

PRELIMINARY Confidential
M2x40 Mote Datasheet Dust Networks™ 18
of Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requirements covering EMC
directive 89/336/EEC, and Low voltage directive 73/23/EEC.
10.3.2 European Compliance
If the M2140 and M2040 motes are incorporated into a product, the manufacturer must ensure compliance of the final
product to the European harmonized EMC and low-voltage/safety standards. A Declaration of Conformity must be issued for
each of these standards and kept on file as described in Annex II of the R&TTE Directive. Furthermore, the manufacturer
must maintain a copy of this M2140/M2040 user documentation and ensure the final product does not exceed the specified
power ratings, antenna specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for compliance testing to all
required standards.
10.3.3 OEM Labeling Requirements
The ‘CE’ marking must be affixed to a visible location on the OEM product. The CE mark shall consist of the initials “CE”
taking the following form:
 If the CE marking is reduced or enlarged, the proportions given in the drawing below must be respected.
 The CE marking must have a height of at least 5mm except where this is not possible on account of the nature of the
apparatus.
 The CE marking must be affixed visibly, legibly, and indelibly.
Furthermore, since the usage of the 2400 – 2483.5 MHz band is not harmonized throughout Europe, the Restriction sign must
be placed to the right of the ‘CE’ marking as shown below. See the R&TTE Directive, Article 12 and Annex VII for more
information.
Figure 13 CE Label Requirements
10.3.4 Restrictions
France—France imposes restrictions on the 2.4 GHz band. Go to www.art-telecom.Fr or contact Dust Networks for more
information.
Norway—Norway prohibits operation near Ny-Alesund in Svalbard. More information can be found at the Norway Posts and
Telecommunications site (www.npt.no).
10.4 Industrial Environment Operation
The M2x40 is designed to meet the specifications of a harsh industrial environments which includes:
• Shock and Vibration—The M2x40 complies with high vibration pipeline testing, as specified in IEC 60770-1.
• Hazardous Locations—The M2x40 design is consistent with operation in UL Class 1 Division 1 and Division 2
hazardous locations.
• Temperature Extremes—The M2x40 is designed for industrial storage and operational temperature range of –40 °C to
+85 °C.
11.0 Ordering Information
Product List:
M2x40: Marconi / 2.4 GHz MHz Mote
Contact Information:
Dust Networks
30695 Huntwood Ave.