User's Manual

PRELIMINARY Confidential
M2x40 Mote Datasheet Dust Networks™ 17
4. An unintentional radiator scan must be performed on the device integrating the M2x40 mote, per FCC rules and
regulations, CFR Title 47, Part 15, Subpart B. See FCC rules for specifics on requirements for declaration of conformity.
10.1.2 FCC-approved Antennae
The following are FCC-approved antenna specifications for the M2x40
Table 14 FCC-approved Antenna Specifications for the M2x40
Gain Pattern Polarization Frequency Connector
+2 dBi maximum Omni-directional Vertical 2.4-2.4835 GHz MMCX
10.1.3 OEM Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. The outside of the final
product enclosure must have a label with the following (or similar) text specifying the FCC identifier. The FCC ID and
certification code must be in Latin letters and Arabic numbers and visible without magnification.
Contains transmitter module FCC ID: SJC-M2140
Or
Contains FCC ID: SJC-M2140
10.2 Industry Canada (IC) Compliance
10.2.1 IC Testing
The M2x40 is certified for modular Industry Canada (IC) RSS-210 approval. The OEM is responsible for its product to
comply with IC ICES-003 and FCC Part 15, Sub. B - Unintentional Radiators. The requirements of ICES-003 are equivalent
to FCC Part 15 Sub. B and Industry Canada accepts FCC test reports or CISPR 22 test reports for compliance with ICES-003.
10.2.2 IC-approved Antennae
The following are IC-approved antenna specifications for the M2x40.
Table 15 IC-approved Antenna Specifications for the M2x40
Gain Pattern Polarization Frequency Connector
+2 dBi maximum Omni-directional Vertical 2.4-2.4835 GHz MMCX
10.2.3 OEM Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are met. The outside of the final
product enclosure must have a label with the following (or similar) text specifying the IC identifier. The IC ID and
certification code must be in Latin letters and Arabic numbers and visible without magnification
Contains IC: 5853A-M2140
10.3 CE Compliance
10.3.1 Declaration of Conformity
We, Dust Networks, of
30695 Huntwood Ave
Hayward, CA 94544 USA
declare under our sole responsibility that our product,
SmartMesh-XD M2140 and M2040, and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards ETSI EN 300 328, ETSI EN 301 489-17 and EN 60950, following the provisions